What's the best way to communicate between view controllers?
Being new to objective-c, cocoa, and iPhone dev in general, I have a strong desire to get the most out of the language and the frameworks.
One of the resources I'm using is Stanford's CS193P class notes that they have left on the web. It includes lecture notes, assignments and sample code, and since the course was given by Apple dev's, I definitely consider it to be "from the horse's mouth".
Class Website:
http://www.stanford.edu/class/cs193p/cgi-bin/index.php
Lecture 08 is related to an assignment to build a UINavigationController based app that has multiple UIViewControllers pushed onto the UINavigationController stack. That's how the UINavigationController works. That's logical. However, there are some stern warnings in the slide about communicating between your UIViewControllers.
I'm going to quote from this serious of slides:
http://cs193p.stanford.edu/downloads/08-NavigationTabBarControllers.pdf
Page 16/51:
How Not To Share Data
Ok. I'm down with that. Don't blindly toss all your methods that will be used for communicating between the viewcontroller into your app delegate and reference the viewcontroller instances in the app delegate methods. Fair 'nuff.
A bit further on, we get this slide telling us what we should do.
Page 18/51:
Best Practices for Data Flow
This slide is then followed by what appears to be a place holder slide where the lecturer then apparently demonstrates the best practices using an example with the UIImagePickerController. I wish the videos were available! :(
Ok, so... I'm afraid my objc-fu is not so strong. I'm also a bit confused by the final line in the above quote. I've been doing my fair share of googling about this and I found what appears to be a decent article talking about the various methods of Observing/Notification techniques:
http://cocoawithlove.com/2008/06/five-approaches-to-listening-observing.html
Method #5 even indicates delegates as an method! Except.... objects can only set one delegate at a time. So when I have multiple viewcontroller communication, what am I to do?
Ok, that's the set up gang. I know I can easily do my communication methods in the app delegate by reference's the multiple viewcontroller instances in my appdelegate but I want to do this sort of thing the right way.
Please help me "do the right thing" by answering the following questions:
These are good questions, and its great to see that you're doing this research and seem concerned with learning how to "do it right" instead of just hacking it together.
First , I agree with the previous answers which focus on the importance of putting data in model objects when appropriate (per the MVC design pattern). Usually you want to avoid putting state information inside a controller, unless it's strictly "presentation" data.
Second , see page 10 of the Stanford presentation for an example of how to programmatically push a controller onto the navigation controller. For an example of how to do this "visually" using Interface Builder, take a look at this tutorial.
Third , and perhaps most importantly, note that the "best practices" mentioned in the Stanford presentation are much easier to understand if you think about them in the context of the "dependency injection" design pattern. In a nutshell, this means that your controller shouldn't "look up" the objects it needs to do its job (eg, reference a global variable). Instead, you should always "inject" those dependencies into the controller (ie, pass in the objects it needs via methods).
If you follow the dependency injection pattern, your controller will be modular and reusable. And if you think about where the Stanford presenters are coming from (ie, as Apple employees their job is to build classes that can easily be reused), reusability and modularity are high priorities. All of the best practices they mention for sharing data are part of dependency injection.
That's the gist of my response. I'll include an example of using the dependency injection pattern with a controller below in case it's helpful.
Example of Using Dependency Injection with a View Controller
Let's say you're building a screen in which several books are listed. The user can pick books he/she wants to buy, and then tap a "checkout" button to go to the checkout screen.
To build this, you might create a BookPickerViewController class that controlls and displays the GUI/view objects. Where will it get all the book data? Let's say it depends on a BookWarehouse object for that. So now your controller is basically brokering data between a model object (BookWarehouse) and the GUI/view objects. In other words, BookPickerViewController DEPENDS on the BookWarehouse object.
Don't do this:
@implementation BookPickerViewController
-(void) doSomething {
// I need to do something with the BookWarehouse so I'm going to look it up
// using the BookWarehouse class method (comparable to a global variable)
BookWarehouse *warehouse = [BookWarehouse getSingleton];
...
}
Instead, the dependencies should be injected like this:
@implementation BookPickerViewController
-(void) initWithWarehouse: (BookWarehouse*)warehouse {
// myBookWarehouse is an instance variable
myBookWarehouse = warehouse;
[myBookWarehouse retain];
}
-(void) doSomething {
// I need to do something with the BookWarehouse object which was
// injected for me
[myBookWarehouse listBooks];
...
}
When the Apple guys are talking about using the delegation pattern to "communicate back up the hierarchy," they're still talking about dependency injection. In this example, what should the BookPickerViewController do once the user has picked his/her books and is ready to check out? Well, that's not really its job. It should DELEGATE that work to some other object, which means that it DEPENDS on another object. So we might modify our BookPickerViewController init method as follows:
@implementation BookPickerViewController
-(void) initWithWarehouse: (BookWarehouse*)warehouse
andCheckoutController:(CheckoutController*)checkoutController
{
myBookWarehouse = warehouse;
myCheckoutController = checkoutController;
}
-(void) handleCheckout {
// We've collected the user's book picks in a "bookPicks" variable
[myCheckoutController handleCheckout: bookPicks];
...
}
The net result of all this is that you can give me your BookPickerViewController class (and related GUI/view objects) and I can easily use it in my own application, assuming BookWarehouse and CheckoutController are generic interfaces (ie, protocols) that I can implement:
@interface MyBookWarehouse : NSObject <BookWarehouse> { ... } @end
@implementation MyBookWarehouse { ... } @end
@interface MyCheckoutController : NSObject <CheckoutController> { ... } @end
@implementation MyCheckoutController { ... } @end
...
-(void) applicationDidFinishLoading {
MyBookWarehouse *myWarehouse = [[MyBookWarehouse alloc]init];
MyCheckoutController *myCheckout = [[MyCheckoutController alloc]init];
BookPickerViewController *bookPicker = [[BookPickerViewController alloc]
initWithWarehouse:myWarehouse
andCheckoutController:myCheckout];
...
[window addSubview:[bookPicker view]];
[window makeKeyAndVisible];
}
Finally, not only is your BookPickerController reusable but also easier to test.
-(void) testBookPickerController {
MockBookWarehouse *myWarehouse = [[MockBookWarehouse alloc]init];
MockCheckoutController *myCheckout = [[MockCheckoutController alloc]init];
BookPickerViewController *bookPicker = [[BookPickerViewController alloc] initWithWarehouse:myWarehouse andCheckoutController:myCheckout];
...
[bookPicker handleCheckout];
// Do stuff to verify that BookPickerViewController correctly called
// MockCheckoutController's handleCheckout: method and passed it a valid
// list of books
...
}
This sort of thing is always a matter of taste.
Having said that, I always prefer to do my coordination (#2) via model objects. The top-level view controller loads or creates the models it needs, and each view controller sets properties in its child controllers to tell them which model objects they need to work with. Most changes are communicated back up the hierarchy by using NSNotificationCenter; firing the notifications is usually built in to the model itself.
For example, suppose I have an app with Accounts and Transactions. I also have an AccountListController, an AccountController (which displays an account summary with a "show all transactions" button), a TransactionListController, and a TransactionController. AccountListController loads a list of all accounts and displays them. When you tap on a list item, it sets the .account property of its AccountController and pushes the AccountController onto the stack. When you tap the "show all transactions" button, AccountController loads the transaction list, puts it in its TransactionListController's .transactions property, and pushes the TransactionListController onto the stack, and so on.
If, say, TransactionController edits the transaction, it makes the change in its transaction object and then calls its 'save' method. 'save' sends a TransactionChangedNotification. Any other controller that needs to refresh itself when the transaction changes would observe the notification and update itself. TransactionListController presumably would; AccountController and AccountListController might, depending on what they were trying to do.
For #1, in my early apps I had some sort of displayModel:withNavigationController: method in the child controller that would set things up and push the controller onto the stack. But as I've become more comfortable with the SDK, I've drifted away from that, and now I usually have the parent push the child.
For #3, consider this example. Here we are using two controllers, AmountEditor and TextEditor, to edit two properties of a Transaction. The Editors should not actually save the transaction being edited, since the user could decide to abandon the transaction. So instead they both take their parent controller as a delegate and call a method on it saying if they've changed anything.
@class Editor;
@protocol EditorDelegate
// called when you're finished. updated = YES for 'save' button, NO for 'cancel'
- (void)editor:(Editor*)editor finishedEditingModel:(id)model updated:(BOOL)updated;
@end
// this is an abstract class
@interface Editor : UIViewController {
id model;
id <EditorDelegate> delegate;
}
@property (retain) Model * model;
@property (assign) id <EditorDelegate> delegate;
...define methods here...
@end
@interface AmountEditor : Editor
...define interface here...
@end
@interface TextEditor : Editor
...define interface here...
@end
// TransactionController shows the transaction's details in a table view
@interface TransactionController : UITableViewController <EditorDelegate> {
AmountEditor * amountEditor;
TextEditor * textEditor;
Transaction * transaction;
}
...properties and methods here...
@end
And now a few methods from TransactionController:
- (void)viewDidLoad {
amountEditor.delegate = self;
textEditor.delegate = self;
}
- (void)editAmount {
amountEditor.model = self.transaction;
[self.navigationController pushViewController:amountEditor animated:YES];
}
- (void)editNote {
textEditor.model = self.transaction;
[self.navigationController pushViewController:textEditor animated:YES];
}
- (void)editor:(Editor*)editor finishedEditingModel:(id)model updated:(BOOL)updated {
if(updated) {
[self.tableView reloadData];
}
[self.navigationController popViewControllerAnimated:YES];
}
The thing to notice is that we've defined a generic protocol which Editors may use to communicate with their owning controller. By doing so, we can reuse the Editors in another part of the application. (Perhaps Accounts can have notes, too.) Of course, the EditorDelegate protocol could contain more than one method; in this case that's the only one necessary.
I see your problem..
What has happened is that someone has confused idea of MVC architecture.
MVC has three parts.. models, views, and controllers.. The stated problem seems to have combined two of them for no good reason. views and controllers are seperate pieces of logic.
so... you do not want to have multiple view-controllers..
you want to have multiple views, and a controller that chooses between them. (you could also have multiple controllers, if you have multiple applications )
views should NOT be making decisions. The controller(s) should do that. Hence the seperation of tasks, and logic, and ways of making your life easier.
So.. make sure your view just does that, puts out a nice veiw of the data. let your controller decide what to do with the data, and which view to use.
(and when we talk about data, we are talking about the model... a nice standard way of being storred, accessed, modified.. another separate piece of logic that we can parcel away and forget about)
链接地址: http://www.djcxy.com/p/20690.html上一篇: 原子和非原子属性之间有什么区别?
下一篇: 视图控制器之间进行通信的最佳方式是什么?