Difference in months between two dates
How to calculate the difference in months between two dates in C#?
Is there is equivalent of VB's DateDiff() method in C#. I need to find difference in months between two dates that are years apart. The documentation says that I can use TimeSpan like:
TimeSpan ts = date1 - date2;
but this gives me data in Days. I don't want to divide this number by 30 because not every month is 30 days and since the two operand values are quite apart from each other, I am afraid dividing by 30 might give me a wrong value.
Any suggestions?
Assuming the day of the month is irrelevant (ie the diff between 2011.1.1 and 2010.12.31 is 1), with date1 > date2 giving a positive value and date2 > date1 a negative value
((date1.Year - date2.Year) * 12) + date1.Month - date2.Month
Or, assuming you want an approximate number of 'average months' between the two dates, the following should work for all but very huge date differences.
date1.Subtract(date2).Days / (365.25 / 12)
Note, if you were to use the latter solution then your unit tests should state the widest date range which your application is designed to work with and validate the results of the calculation accordingly.
Update (with thanks to Gary)
If using the 'average months' method, a slightly more accurate number to use for the 'average number of days per year' is 365.2425.
Here is a comprehensive solution to return a DateTimeSpan , similar to a TimeSpan , except that it includes all the date components in addition to the time components.
Usage:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = DateTimeSpan.CompareDates(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Outputs:
Years: 1
Months: 5
Days: 27
Hours: 1
Minutes: 36
Seconds: 50
Milliseconds: 0
For convenience, I've lumped the logic into the DateTimeSpan struct, but you may move the method CompareDates wherever you see fit. Also note, it doesn't matter which date comes before the other.
public struct DateTimeSpan
{
private readonly int years;
private readonly int months;
private readonly int days;
private readonly int hours;
private readonly int minutes;
private readonly int seconds;
private readonly int milliseconds;
public DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
this.years = years;
this.months = months;
this.days = days;
this.hours = hours;
this.minutes = minutes;
this.seconds = seconds;
this.milliseconds = milliseconds;
}
public int Years { get { return years; } }
public int Months { get { return months; } }
public int Days { get { return days; } }
public int Hours { get { return hours; } }
public int Minutes { get { return minutes; } }
public int Seconds { get { return seconds; } }
public int Milliseconds { get { return milliseconds; } }
enum Phase { Years, Months, Days, Done }
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2)
{
if (date2 < date1)
{
var sub = date1;
date1 = date2;
date2 = sub;
}
DateTime current = date1;
int years = 0;
int months = 0;
int days = 0;
Phase phase = Phase.Years;
DateTimeSpan span = new DateTimeSpan();
int officialDay = current.Day;
while (phase != Phase.Done)
{
switch (phase)
{
case Phase.Years:
if (current.AddYears(years + 1) > date2)
{
phase = Phase.Months;
current = current.AddYears(years);
}
else
{
years++;
}
break;
case Phase.Months:
if (current.AddMonths(months + 1) > date2)
{
phase = Phase.Days;
current = current.AddMonths(months);
if (current.Day < officialDay && officialDay <= DateTime.DaysInMonth(current.Year, current.Month))
current = current.AddDays(officialDay - current.Day);
}
else
{
months++;
}
break;
case Phase.Days:
if (current.AddDays(days + 1) > date2)
{
current = current.AddDays(days);
var timespan = date2 - current;
span = new DateTimeSpan(years, months, days, timespan.Hours, timespan.Minutes, timespan.Seconds, timespan.Milliseconds);
phase = Phase.Done;
}
else
{
days++;
}
break;
}
}
return span;
}
}
If you want the exact number of full months, always positive (2000-01-15, 2000-02-14 returns 0), considering a full month is when you reach the same day the next month (something like the age calculation)
public static int GetMonthsBetween(DateTime from, DateTime to)
{
if (from > to) return GetMonthsBetween(to, from);
var monthDiff = Math.Abs((to.Year * 12 + (to.Month - 1)) - (from.Year * 12 + (from.Month - 1)));
if (from.AddMonths(monthDiff) > to || to.Day < from.Day)
{
return monthDiff - 1;
}
else
{
return monthDiff;
}
}
Edit reason: the old code was not correct in some cases like :
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
Test cases I used to test the function:
var tests = new[]
{
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 2), Result = 0 },
new { From = new DateTime(1900, 1, 2), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 2, 1), Result = 1 },
new { From = new DateTime(1900, 2, 1), To = new DateTime(1900, 1, 1), Result = 1 },
new { From = new DateTime(1900, 1, 31), To = new DateTime(1900, 2, 1), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 9, 30), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 10, 1), Result = 1 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1901, 1, 1), Result = 12 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1911, 1, 1), Result = 132 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
};
上一篇: 不变文化与序数字符串比较的区别
下一篇: 两个日期之间的月差