How do we verify commit messages for a push?
Coming from CVS, we have a policy that commit messages should be tagged with a bug number (simple suffix "... [9999]"). A CVS script checks this during commits and rejects the commit if the message does not conform.
The git hook commit-msg does this on the developer side but we find it helpful to have automated systems check and remind us of this.
During a git push, commit-msg isn't run. Is there another hook during push that could check commit messages?
How do we verify commit messages during a git push?
Using the update hook
You know about hooks - please, read the documentation about them! The hook you probably want is update, which is run once per ref. (The pre-receive hook is run once for the entire push) There are tons and tons of questions and answers about these hooks already on SO; depending on what you want to do, you can probably find guidance about how to write the hook if you need it.
To emphasize that this really is possible, a quote from the docs:
This hook can be used to prevent forced update on certain refs by making sure that the object name is a commit object that is a descendant of the commit object named by the old object name. That is, to enforce a "fast-forward only" policy.
It could also be used to log the old..new status.
And the specifics:
The hook executes once for each ref to be updated, and takes three parameters:
So, for example, if you want to make sure that none of the commit subjects are longer than 80 characters, a very rudimentary implementation would be:
#!/bin/bash
long_subject=$(git log --pretty=%s $2..$3 | egrep -m 1 '.{81}')
if [ -n "$long_subject" ]; then
echo "error: commit subject over 80 characters:"
echo " $long_subject"
exit 1
fi
Of course, that's a toy example; in the general case, you'd use a log output containing the full commit message, split it up per-commit, and call your verification code on each individual commit message.
Why you want the update hook
This has been discussed/clarified in the comments; here's a summary.
The update hook runs once per ref. A ref is a pointer to an object; in this case, we're talking about branches and tags, and generally just branches (people don't push tags often, since they're usually just for marking versions).
Now, if a user is pushing updates to two branches, master and experimental:
o - o - o (origin/master) - o - X - o - o (master)
o - o (origin/experimental) - o - o (experimental)
Suppose that X is the "bad" commit, ie the one which would fail the commit-msg hook. Clearly we don't want to accept the push to master. So, the update hook rejects that. But there's nothing wrong with the commits on experimental! The update hook accepts that one. Therefore, origin/master stays unchanged, but origin/experimental gets updated:
o - o - o (origin/master) - o - X - o - o (master)
o - o - o - o (origin/experimental, experimental)
The pre-receive hook runs only once, just before beginning to update refs (before the first time the update hook is run). If you used it, you'd have to cause the whole push to fail, thus saying that because there was a bad commit message on master, you somehow no longer trust that the commits on experimental are good even though their messages are fine!
You could do it with the following pre-receive hook. As the other answers have noted, this is a conservative, all-or-nothing approach. Note that it protects only the master branch and places no constraints on commit messages on topic branches.
#! /usr/bin/perl
my $errors = 0;
while (<>) {
chomp;
next unless my($old,$new) =
m[ ^ ([0-9a-f]+) s+ # old SHA-1
([0-9a-f]+) s+ # new SHA-1
refs/heads/master # ref
s* $ ]x;
chomp(my @commits = `git rev-list $old..$new`);
if ($?) {
warn "git rev-list $old..$new failedn";
++$errors, next;
}
foreach my $sha1 (@commits) {
my $msg = `git cat-file commit $sha1`;
if ($?) {
warn "git cat-file commit $sha1 failed";
++$errors, next;
}
$msg =~ s/A.+? ^$ s+//smx;
unless ($msg =~ /[d+]/) {
warn "No bug number in $sha1:nn" . $msg . "n";
++$errors, next;
}
}
}
exit $errors == 0 ? 0 : 1;
It requires all commits in a push to have a bug number somewhere in their respective commit messages, not just the tip. For example:
$ git log --pretty=oneline origin/master..HEAD 354d783efd7b99ad8666db45d33e30930e4c8bb7 second [123] aeb73d00456fc73f5e33129fb0dcb16718536489 no bug number $ git push origin master Counting objects: 6, done. Delta compression using up to 2 threads. Compressing objects: 100% (4/4), done. Writing objects: 100% (5/5), 489 bytes, done. Total 5 (delta 0), reused 0 (delta 0) Unpacking objects: 100% (5/5), done. No bug number in aeb73d00456fc73f5e33129fb0dcb16718536489: no bug number To file:///tmp/bare.git ! [remote rejected] master -> master (pre-receive hook declined) error: failed to push some refs to 'file:///tmp/bare.git'
Say we fix the problem by squashing the two commits together and pushing the result:
$ git rebase -i origin/master [...] $ git log --pretty=oneline origin/master..HEAD 74980036dbac95c97f5c6bfd64a1faa4c01dd754 second [123] $ git push origin master Counting objects: 4, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 279 bytes, done. Total 3 (delta 0), reused 0 (delta 0) Unpacking objects: 100% (3/3), done. To file:///tmp/bare.git 8388e88..7498003 master -> master
This is a python version of pre-receive , which took me a while to finish, hope it could help others. I mainly use it with Trac, but it could be easily modified for other purposes.
I have also put down the instructions to modify back the historical commit message, which is a little more complicated than I thought.
#!/usr/bin/env python
import subprocess
import sys
import re
def main():
input = sys.stdin.read()
oldrev, newrev, refname = input.split(" ")
separator = "----****----"
proc = subprocess.Popen(["git", "log", "--format=%H%n%ci%n%s%b%n" + separator, oldrev + ".." + newrev], stdout=subprocess.PIPE)
message = proc.stdout.read()
commit_list = message.strip().split(separator)[:-1] #discard the last line
is_valid = True
print "Parsing message:"
print message
for commit in commit_list:
line_list = commit.strip().split("n")
hash = line_list[0]
date = line_list[1]
content = " ".join(line_list[2:])
if not re.findall("refs *#[0-9]+", content): #check for keyword
is_valid = False
if not is_valid:
print "Please hook a trac ticket when commiting the source code!!!"
print "Use this command to change commit message (one commit at a time): "
print "1. run: git rebase --interactive " + oldrev + "^"
print "2. In the default editor, modify 'pick' to 'edit' in the line whose commit you want to modify"
print "3. run: git commit --amend"
print "4. modify the commit message"
print "5. run: git rebase --continue"
print "6. remember to add the ticket number next time!"
print "reference: http://stackoverflow.com/questions/1186535/how-to-modify-a-specified-commit"
sys.exit(1)
main()
上一篇: 我如何将两个提交合并为一个提交？
下一篇: 我们如何验证推送提交消息？