Why does X[Y] join of data.tables not allow a full outer join, or a left join?

This is a bit of a philosophical question about data.table join syntax. I am finding more and more uses for data.tables, but still learning...

The join format X[Y] for data.tables is very concise, handy and efficient, but as far as I can tell, it only supports inner joins and right outer joins. To get a left or full outer join, I need to use merge :

  • X[Y, nomatch = NA] -- all rows in Y -- right outer join (default)
  • X[Y, nomatch = 0] -- only rows with matches in both X and Y -- inner join
  • merge(X, Y, all = TRUE) -- all rows from both X and Y -- full outer join
  • merge(X, Y, all.x = TRUE) -- all rows in X -- left outer join
  • It seems to me that it would be handy if the X[Y] join format supported all 4 types of joins. Is there a reason only two types of joins are supported?

    For me, the nomatch = 0 and nomatch = NA parameter values are not very intuitive for the actions being performed. It is easier for me to understand and remember the merge syntax: all = TRUE , all.x = TRUE and all.y = TRUE . Since the X[Y] operation resembles merge much more than match , why not use the merge syntax for joins rather than the match function's nomatch parameter?

    Here are code examples of the 4 join types:

    # sample X and Y data.tables
    library(data.table)
    X <- data.table(t = 1:4, a = (1:4)^2)
    setkey(X, t)
    X
    #    t  a
    # 1: 1  1
    # 2: 2  4
    # 3: 3  9
    # 4: 4 16
    
    Y <- data.table(t = 3:6, b = (3:6)^2)
    setkey(Y, t)
    Y
    #    t  b
    # 1: 3  9
    # 2: 4 16
    # 3: 5 25
    # 4: 6 36
    
    # all rows from Y - right outer join
    X[Y]  # default
    #  t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    # 3: 5 NA 25
    # 4: 6 NA 36
    
    X[Y, nomatch = NA]  # same as above
    #    t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    # 3: 5 NA 25
    # 4: 6 NA 36
    
    merge(X, Y, by = "t", all.y = TRUE)  # same as above
    #    t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    # 3: 5 NA 25
    # 4: 6 NA 36
    
    identical(X[Y], merge(X, Y, by = "t", all.y = TRUE))
    # [1] TRUE
    
    # only rows in both X and Y - inner join
    X[Y, nomatch = 0]  
    #    t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    
    merge(X, Y, by = "t")  # same as above
    #    t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    
    merge(X, Y, by = "t", all = FALSE)  # same as above
    #    t  a  b
    # 1: 3  9  9
    # 2: 4 16 16
    
    identical( X[Y, nomatch = 0], merge(X, Y, by = "t", all = FALSE) )
    # [1] TRUE
    
    # all rows from X - left outer join
    merge(X, Y, by = "t", all.x = TRUE)
    #    t  a  b
    # 1: 1  1 NA
    # 2: 2  4 NA
    # 3: 3  9  9
    # 4: 4 16 16
    
    # all rows from both X and Y - full outer join
    merge(X, Y, by = "t", all = TRUE)
    #    t  a  b
    # 1: 1  1 NA
    # 2: 2  4 NA
    # 3: 3  9  9
    # 4: 4 16 16
    # 5: 5 NA 25
    # 6: 6 NA 36
    

    Update: data.table v1.9.6 introduced the on= syntax, which allows ad hoc joins on fields other than the primary key. jangorecki's answer to the question How to join (merge) data frames (inner, outer, left, right)? provides some examples of additional join types that data.table can handle.


    To quote from the data.table FAQ 1.12

    1.12

    What is the difference between X[Y] and merge(X,Y)?

  • X[Y] is a join, looking up X's rows using Y (or Y's key if it has one) as an index.
  • Y[X] is a join, looking up Y's rows using X (or X's key if it has one)
  • merge(X,Y) does both ways at the same time.
  • The number of rows of X[Y] and Y[X] usually differ; whereas the number of rows returned by merge(X,Y) and merge(Y,X) is the same. BUT that misses the main point. Most tasks require something to be done on the data after a join or merge. Why merge all the columns of data, only to use a small subset of them afterwards? You may suggest merge(X[,ColsNeeded1],Y[,ColsNeeded2]) , but that takes copies of the sub- sets of data, and it requires the programmer to work out which columns are needed. X[Y,j ] in data.table does all that in one step for you. When you write X[Y,sum(foo*bar)] , data.table automatically inspects the j expression to see which columns it uses. It will only subset those columns only; the others are ignored. Memory is only created for the columns the j uses, and Y columns enjoy standard R recycling rules within the context of each group. Let's say foo is in X, and bar is in Y (along with 20 other columns in Y). Isn't X[Y,sum(foo*bar)] quicker to program and quicker to run than a merge followed by a subset?

    If you want a left outer join of X[Y]

    le <- Y[X]
    mallx <- merge(X, Y, all.x = T)
    # the column order is different so change to be the same as `merge`
    setcolorder(le, names(mallx))
    identical(le, mallx)
    # [1] TRUE
    

    If you want a full outer join

    # the unique values for the keys over both data sets
    unique_keys <- unique(c(X[,t], Y[,t]))
    Y[X[J(unique_keys)]]
    ##   t  b  a
    ## 1: 1 NA  1
    ## 2: 2 NA  4
    ## 3: 3  9  9
    ## 4: 4 16 16
    ## 5: 5 25 NA
    ## 6: 6 36 NA
    
    # The following will give the same with the column order X,Y
    X[Y[J(unique_keys)]]
    

    @mnel's answer is spot on, so do accept that answer. This is just follow up, too long for comments.

    As mnel says, left/right outer join is obtained by swapping Y and X : Y[X] -vs- X[Y] . So 3 of the 4 join types are supported in that syntax, not 2, iiuc.

    Adding the 4th seems a good idea. Let's say we add full=TRUE or both=TRUE or merge=TRUE (not sure the best argument name?) then it hadn't occurred to me before that X[Y,j,merge=TRUE] would be useful for the reasons after the BUT in FAQ 1.12. New feature request now added and linked back here, thanks :

    FR#2301 : Add merge=TRUE argument for both X[Y] and Y[X] join like merge() does.

    Recent versions have sped up merge.data.table (by taking a shallow copy internally to set the keys more efficiently, for example). So we are trying to bring merge() and X[Y] closer, and provide all options to user for full flexibility. There are pros and cons of both. Another outstanding feature request is :

    FR#2033 : Add by.x and by.y to merge.data.table

    If there are any others, please keep them coming.

    By this part in the question :

    why not use the merge syntax for joins rather than the match function's nomatch parameter?

    If you prefer merge() syntax and its 3 arguments all , all.x and all.y then just use that instead of X[Y] . Think it should cover all the cases. Or did you mean why is the argument a single nomatch in [.data.table ? If so, it's just the way that seemed natural given FAQ 2.14 : "Can you explain further why data.table is inspired by A[B] syntax in base?". But also, nomatch only takes two values currently 0 and NA . That could be extended so that a negative value meant something, or 12 would mean use the 12th row's values to fill in NAs, for example, or nomatch in future could be a vector or even itself a data.table .

    Hm. How would by-without-by interact with merge=TRUE? Perhaps we should take this over to datatable-help.


    This "answer" is a proposal for discussion: As indicated in my comment, I suggest adding a join parameter to [.data.table() to enable additional types of joins, ie: X[Y,j,join=string] . In addition to the 4 types of ordinary joins, I also suggest to support 3 types of exclusive joins, and the cross join.

    The join string values (and aliases) for the various join types are proposed to be:

  • "all.y" and "right" -- right join, the present data.table default (nomatch=NA) - all Y rows with NAs where there is no X match;
  • "both" and "inner" -- inner join (nomatch=0) - only rows where X and Y match;

  • "all.x" and "left" -- left join - all rows from X, NAs where no Y match:

  • "outer" and "full" -- full outer join - all rows from X and Y, NAs where no match

  • "only.x" and "not.y" -- non-join or anti-join returning X rows where there is no Y match

  • "only.y" and "not.x" -- non-join or anti-join returning Y rows where there is no X match
  • "not.both" -- exclusive join returning X and Y rows where there is no match to the other table, ie an exclusive-or (XOR)
  • "cross" -- cross join or Cartesian product with each row of X matched to each row of Y
  • The default value is join="all.y" which corresponds to the present default.

    The "all", "all.x" and "all.y" string values correspond to merge() parameters. The "right", "left", "inner" and "outer" strings may be more amenable to SQL users.

    The "both" and "not.both" strings are my best suggestion at the moment -- but someone may have better string suggestions for the inner join and exclusive join. (I'm not sure if "exclusive" is the right terminology, correct me if there is a proper term for an "XOR" join.)

    Use of join="not.y" is an alternative for X[-Y,j] or X[!Y,j] non-join syntax and maybe more clear (to me), although I'm not sure if they are the same (new feature in data.table version 1.8.3).

    The cross join can be handy sometimes, but it may not fit in the data.table paradigm.

    链接地址: http://www.djcxy.com/p/24918.html

    上一篇: 左外连接和右外连接

    下一篇: 为什么data.tables的X [Y]连接不允许完整的外连接或左连接?