Optimal/efficient plotting of survival/regression analysis results
I perform regression analyses on a daily basis. In my case this typically means estimation of the effect of continuous and categorical predictors on various outcomes. Survival analysis is probably the most common analysis that I perform. Such analyses are often presented in a very convenient way in journals. Here is an example:
I wonder if anyone has come across any publicly availble function or package that can:
directly use a regression object ( coxph , lm, lmer, glm or whatever object you have)
plot the effect of each predictor on a forest plot, or perhaps even allow for plotting of a selection of the predictors.
for categorical predictors also display the reference category
Display the number of events in each category for factor variables (see image above). Display p values.
preferably use ggplot
offer some sort of customization
I am aware that sjPlot package allows for plotting of lme4, glm and lm results. But no package allows the abovementioned for coxph results and coxph is one of the most used regression methods. I have tried to create such a function myself but without any success . I have read this great post: Reproduce table and plot from journal but could not figure out how to "generalize" the code.
Any suggestions are much welcome.
Edit I've now put this together into a package on github. I've tested it using output from coxph , lm and glm .
Example:
devtools::install_github("NikNakk/forestmodel")
library("forestmodel")
example(forest_model)
Original code posted on SO (superseded by github package):
I've worked on this specifically for coxph models, though the same technique could be extended to other regression models, especially since it uses the broom package to extract the coefficients. The supplied forest_cox function takes as its arguments the output of coxph . (Data is pulled using model.frame to calculate the number of individuals in each group and to find the reference levels for factors.) It also takes a number of formatting arguments. The return value is a ggplot which can be printed, saved, etc.
The output is modelled on the NEJM figure shown in the question.
library("survival")
library("broom")
library("ggplot2")
library("dplyr")
forest_cox <- function(cox, widths = c(0.10, 0.07, 0.05, 0.04, 0.54, 0.03, 0.17),
colour = "black", shape = 15, banded = TRUE) {
data <- model.frame(cox)
forest_terms <- data.frame(variable = names(attr(cox$terms, "dataClasses"))[-1],
term_label = attr(cox$terms, "term.labels"),
class = attr(cox$terms, "dataClasses")[-1], stringsAsFactors = FALSE,
row.names = NULL) %>%
group_by(term_no = row_number()) %>% do({
if (.$class == "factor") {
tab <- table(eval(parse(text = .$term_label), data, parent.frame()))
data.frame(.,
level = names(tab),
level_no = 1:length(tab),
n = as.integer(tab),
stringsAsFactors = FALSE, row.names = NULL)
} else {
data.frame(., n = sum(!is.na(eval(parse(text = .$term_label), data, parent.frame()))),
stringsAsFactors = FALSE)
}
}) %>%
ungroup %>%
mutate(term = paste0(term_label, replace(level, is.na(level), "")),
y = n():1) %>%
left_join(tidy(cox), by = "term")
rel_x <- cumsum(c(0, widths / sum(widths)))
panes_x <- numeric(length(rel_x))
forest_panes <- 5:6
before_after_forest <- c(forest_panes[1] - 1, length(panes_x) - forest_panes[2])
panes_x[forest_panes] <- with(forest_terms, c(min(conf.low, na.rm = TRUE), max(conf.high, na.rm = TRUE)))
panes_x[-forest_panes] <-
panes_x[rep(forest_panes, before_after_forest)] +
diff(panes_x[forest_panes]) / diff(rel_x[forest_panes]) *
(rel_x[-(forest_panes)] - rel_x[rep(forest_panes, before_after_forest)])
forest_terms <- forest_terms %>%
mutate(variable_x = panes_x[1],
level_x = panes_x[2],
n_x = panes_x[3],
conf_int = ifelse(is.na(level_no) | level_no > 1,
sprintf("%0.2f (%0.2f-%0.2f)", exp(estimate), exp(conf.low), exp(conf.high)),
"Reference"),
p = ifelse(is.na(level_no) | level_no > 1,
sprintf("%0.3f", p.value),
""),
estimate = ifelse(is.na(level_no) | level_no > 1, estimate, 0),
conf_int_x = panes_x[forest_panes[2] + 1],
p_x = panes_x[forest_panes[2] + 2]
)
forest_lines <- data.frame(x = c(rep(c(0, mean(panes_x[forest_panes + 1]), mean(panes_x[forest_panes - 1])), each = 2),
panes_x[1], panes_x[length(panes_x)]),
y = c(rep(c(0.5, max(forest_terms$y) + 1.5), 3),
rep(max(forest_terms$y) + 0.5, 2)),
linetype = rep(c("dashed", "solid"), c(2, 6)),
group = rep(1:4, each = 2))
forest_headings <- data.frame(term = factor("Variable", levels = levels(forest_terms$term)),
x = c(panes_x[1],
panes_x[3],
mean(panes_x[forest_panes]),
panes_x[forest_panes[2] + 1],
panes_x[forest_panes[2] + 2]),
y = nrow(forest_terms) + 1,
label = c("Variable", "N", "Hazard Ratio", "", "p"),
hjust = c(0, 0, 0.5, 0, 1)
)
forest_rectangles <- data.frame(xmin = panes_x[1],
xmax = panes_x[forest_panes[2] + 2],
y = seq(max(forest_terms$y), 1, -2)) %>%
mutate(ymin = y - 0.5, ymax = y + 0.5)
forest_theme <- function() {
theme_minimal() +
theme(axis.ticks.x = element_blank(),
panel.grid.major = element_blank(),
panel.grid.minor = element_blank(),
axis.title.y = element_blank(),
axis.title.x = element_blank(),
axis.text.y = element_blank(),
strip.text = element_blank(),
panel.margin = unit(rep(2, 4), "mm")
)
}
forest_range <- exp(panes_x[forest_panes])
forest_breaks <- c(
if (forest_range[1] < 0.1) seq(max(0.02, ceiling(forest_range[1] / 0.02) * 0.02), 0.1, 0.02),
if (forest_range[1] < 0.8) seq(max(0.2, ceiling(forest_range[1] / 0.2) * 0.2), 0.8, 0.2),
1,
if (forest_range[2] > 2) seq(2, min(10, floor(forest_range[2] / 2) * 2), 2),
if (forest_range[2] > 20) seq(20, min(100, floor(forest_range[2] / 20) * 20), 20)
)
main_plot <- ggplot(forest_terms, aes(y = y))
if (banded) {
main_plot <- main_plot +
geom_rect(aes(xmin = xmin, xmax = xmax, ymin = ymin, ymax = ymax),
forest_rectangles, fill = "#EFEFEF")
}
main_plot <- main_plot +
geom_point(aes(estimate, y), size = 5, shape = shape, colour = colour) +
geom_errorbarh(aes(estimate,
xmin = conf.low,
xmax = conf.high,
y = y),
height = 0.15, colour = colour) +
geom_line(aes(x = x, y = y, linetype = linetype, group = group),
forest_lines) +
scale_linetype_identity() +
scale_alpha_identity() +
scale_x_continuous(breaks = log(forest_breaks),
labels = sprintf("%g", forest_breaks),
expand = c(0, 0)) +
geom_text(aes(x = x, label = label, hjust = hjust),
forest_headings,
fontface = "bold") +
geom_text(aes(x = variable_x, label = variable),
subset(forest_terms, is.na(level_no) | level_no == 1),
fontface = "bold",
hjust = 0) +
geom_text(aes(x = level_x, label = level), hjust = 0, na.rm = TRUE) +
geom_text(aes(x = n_x, label = n), hjust = 0) +
geom_text(aes(x = conf_int_x, label = conf_int), hjust = 0) +
geom_text(aes(x = p_x, label = p), hjust = 1) +
forest_theme()
main_plot
}
Sample data and plot
pretty_lung <- lung %>%
transmute(time,
status,
Age = age,
Sex = factor(sex, labels = c("Male", "Female")),
ECOG = factor(lung$ph.ecog),
`Meal Cal` = meal.cal)
lung_cox <- coxph(Surv(time, status) ~ ., pretty_lung)
print(forest_cox(lung_cox))
For a "write this code for me" question showing no effort, you certainly have a lot of specific demands. This doesn't fit your criteria, but maybe someone will find it useful in base graphics
The plot in the center panel can be just about anything so long as there is one plot per line and kindasorta fits within each. (Actually that's not true, any kind of plot can go in that panel if you want since it's just a normal plotting window). There are three examples in this code: points, box plots, lines.
This is the input data. Just a generic list and indices for "headers" so much better IMO than "directly using a regression object."
## indices of headers
idx <- c(1,5,7,22)
l <- list('Make/model' = rownames(mtcars),
'No. ofncycles' = mtcars$cyl,
MPG = mtcars$mpg)
l[] <- lapply(seq_along(l), function(x)
ifelse(seq_along(l[[x]]) %in% idx, l[[x]], paste0(' ', l[[x]])))
# List of 3
# $ Make/model : chr [1:32] "Mazda RX4" " Mazda RX4 Wag" " Datsun 710" " Hornet 4 Drive" ...
# $ No. of
# cycles: chr [1:32] "6" " 6" " 4" " 6" ...
# $ MPG : chr [1:32] "21" " 21" " 22.8" " 21.4" ...
I realize this code generates a pdf. I didn't feel like changing it to an image to upload, so I converted it with imagemagick
## choose the type of plot you want
pl <- c('point','box','line')[1]
## extra (or less) c(bottom, left, top, right) spacing for additions in margins
pad <- c(0,0,0,0)
## default padding
oma <- c(1,1,2,1)
## proportional size of c(left, middle, right) panels
xfig = c(.25,.45,.3)
## proportional size of c(caption, main plot)
yfig = c(.15, .85)
cairo_pdf('~/desktop/pl.pdf', height = 9, width = 8)
x <- l[-3]
lx <- seq_along(x[[1]])
nx <- length(lx)
xcf <- cumsum(xfig)[-length(xfig)]
ycf <- cumsum(yfig)[-length(yfig)]
plot.new()
par(oma = oma, mar = c(0,0,0,0), family = 'serif')
plot.window(range(seq_along(x)), range(lx))
## bars -- see helper fn below
par(fig = c(0,1,ycf,1), oma = par('oma') + pad)
bars(lx)
## caption
par(fig = c(0,1,0,ycf), mar = c(0,0,3,0), oma = oma + pad)
p <- par('usr')
box('plot')
rect(p[1], p[3], p[2], p[4], col = adjustcolor('cornsilk', .5))
mtext('tFigure I: Some fancy statistical model results.',
adj = 0, font = 2, line = -1)
mtext(paste('tHere we discuss the fancy graphic that you are currently reading',
'about. We worked really hard on it, and yountshould appreciate',
'our hard work by citing this paper in your next manuscript.'),
adj = 0, line = -3)
## left panel -- select two columns
lp <- l[1:2]
par(fig = c(0,xcf[1],ycf,1), oma = oma + vec(pad, 0, 4))
plot_text(lp, c(1,2),
adj = rep(0:1, c(nx, nx)),
font = vec(1, 3, idx, nx),
col = c(rep(1, nx), vec(1, 'transparent', idx, nx))
) -> at
vtext(unique(at$x), max(at$y) + c(1,1.5), names(lp),
font = 2, xpd = NA, adj = c(0,1))
## right panel -- select three columns
rp <- l[c(2:3,3)]
par(fig = c(tail(xcf, -1),1,ycf,1), oma = oma + vec(pad, 0, 2))
plot_text(rp, c(1,2),
col = c(rep(vec(1, 'transparent', idx, nx), 2),
vec('transparent', 2, idx, nx)),
font = vec(1, 3, idx, nx),
adj = rep(c(NA,NA,1), each = nx)
) -> at
vtext(unique(at$x), max(at$y) + c(1.5,1,1), names(rp),
font = 2, xpd = NA, adj = c(NA, NA, 1), col = c(1,1,2))
## middle panel -- some generic plot
par(new = TRUE, fig = c(xcf[1], xcf[2], ycf, 1),
mar = c(0,2,0,2), oma = oma + vec(pad, 0, c(2,4)))
set.seed(1)
xx <- rev(rnorm(length(lx)))
yy <- rev(lx)
plot(xx, yy, ann = FALSE, axes = FALSE, type = 'n',
panel.first = {
segments(0, 0, 0, nx, lty = 'dashed')
},
panel.last = {
## option 1: points, confidence intervals
if (pl == 'point') {
points(xx, yy, pch = 15, col = vec(1, 2, idx, nx))
segments(xx * .5, yy, xx * 1.5, yy, col = vec(1, 2, idx, nx))
}
## option 2: boxplot, distributions
if (pl == 'box')
boxplot(rnorm(200) ~ rep_len(1:nx, 200), at = nx:1,
col = vec(par('bg'), 2, idx, nx),
horizontal = TRUE, axes = FALSE, add = TRUE)
## option 3: trend lines
if (pl == 'line') {
for (ii in 1:nx) {
n <- sample(40, 1)
wh <- which(nx:1 %in% ii)
lines(cumsum(rep(.1, n)) - 2, wh + cumsum(runif(n, -.2, .2)), xpd = NA,
col = (ii %in% idx) + 1L, lwd = c(1,3)[(ii %in% idx) + 1L])
}
}
## final touches
mtext('HR (95% confidence interval)', font = 2, line = -.5)
axis(1, at = -3:2, tcl = 0.2, mgp = c(0,0,0))
mtext(c('Worse','Better'), side = 1, line = 1, at = c(-4, 3))
try(silent = TRUE, {
## can just replace this with graphics::arrows with minor changes
## i just like the filled ones
rawr::arrows2(-.1, -1.5, -3, size = .5, width = .5)
rawr::arrows2(0.1, -1.5, 2, size = .5, width = .5)
})
}
)
box('outer')
dev.off()
Using these four helper functions (see example use in the body)
vec <- function(default, replacement, idx, n) {
# vec(1, 0, 2:3, 5); vec(1:5, 0, 2:3)
out <- if (missing(n))
default else rep(default, n)
out[idx] <- replacement
out
}
bars <- function(x, cols = c(NA, grey(.9)), horiz = TRUE) {
# plot(1:10, type = 'n'); bars(1:10)
p <- par('usr')
cols <- vec(cols[1], cols[2], which(!x %% 2), length(x))
x <- rev(x) + 0.5
if (horiz)
rect(p[1], x - 1L, p[2], x, border = NA, col = rev(cols), xpd = NA) else
rect(x - 1L, p[3], x, p[4], border = NA, col = rev(cols), xpd = NA)
invisible()
}
vtext <- function(...) {Vectorize(text.default)(...); invisible()}
plot_text <- function(x, width = range(seq_along(x)), ...) {
# plot(col(mtcars), row(mtcars), type = 'n'); plot_text(mtcars)
lx <- lengths(x)[1]
rn <- range(seq_along(x))
sx <- (seq_along(x) - 1) / diff(rn) * diff(width) + width[1]
xx <- rep(sx, each = lx)
yy <- rep(rev(seq.int(lx)), length(x))
vtext(xx, yy, unlist(x), ..., xpd = NA)
invisible(list(x = sx, y = rev(seq.int(lx))))
}
上一篇: 扩展ggplot中定性变量的限制
下一篇: 存活/回归分析结果的最佳/有效绘图