Best approach to real time http streaming to HTML5 video client
I'm really stuck trying to understand the best way to stream real time output of ffmpeg to a HTML5 client using node.js, as there are a number of variables at play and I don't have a lot of experience in this space, having spent many hours trying different combinations.
My use case is:
1) IP video camera RTSP H.264 stream is picked up by FFMPEG and remuxed into a mp4 container using the following FFMPEG settings in node, output to STDOUT. This is only run on the initial client connection, so that partial content requests don't try to spawn FFMPEG again.
liveFFMPEG = child_process.spawn("ffmpeg", [
"-i", "rtsp://admin:12345@192.168.1.234:554" , "-vcodec", "copy", "-f",
"mp4", "-reset_timestamps", "1", "-movflags", "frag_keyframe+empty_moov",
"-" // output to stdout
], {detached: false});
2) I use the node http server to capture the STDOUT and stream that back to the client upon a client request. When the client first connects I spawn the above FFMPEG command line then pipe the STDOUT stream to the HTTP response.
liveFFMPEG.stdout.pipe(resp);
I have also used the stream event to write the FFMPEG data to the HTTP response but makes no difference
xliveFFMPEG.stdout.on("data",function(data) {
resp.write(data);
}
I use the following HTTP header (which is also used and working when streaming pre-recorded files)
var total = 999999999 // fake a large file
var partialstart = 0
var partialend = total - 1
if (range !== undefined) {
var parts = range.replace(/bytes=/, "").split("-");
var partialstart = parts[0];
var partialend = parts[1];
}
var start = parseInt(partialstart, 10);
var end = partialend ? parseInt(partialend, 10) : total; // fake a large file if no range reques
var chunksize = (end-start)+1;
resp.writeHead(206, {
'Transfer-Encoding': 'chunked'
, 'Content-Type': 'video/mp4'
, 'Content-Length': chunksize // large size to fake a file
, 'Accept-Ranges': 'bytes ' + start + "-" + end + "/" + total
});
3) The client has to use HTML5 video tags.
I have no problems with streaming playback (using fs.createReadStream with 206 HTTP partial content) to the HTML5 client a video file previously recorded with the above FFMPEG command line (but saved to a file instead of STDOUT), so I know the FFMPEG stream is correct, and I can even correctly see the video live streaming in VLC when connecting to the HTTP node server.
However trying to stream live from FFMPEG via node HTTP seems to be a lot harder as the client will display one frame then stop. I suspect the problem is that I am not setting up the HTTP connection to be compatible with the HTML5 video client. I have tried a variety of things like using HTTP 206 (partial content) and 200 responses, putting the data into a buffer then streaming with no luck, so I need to go back to first principles to ensure I'm setting this up the right way.
Here is my understanding of how this should work, please correct me if I'm wrong:
1) FFMPEG should be setup to fragment the output and use an empty moov (FFMPEG frag_keyframe and empty_moov mov flags). This means the client does not use the moov atom which is typically at the end of the file which isn't relevant when streaming (no end of file), but means no seeking possible which is fine for my use case.
2) Even though I use MP4 fragments and empty MOOV, I still have to use HTTP partial content, as the HTML5 player will wait until the entire stream is downloaded before playing, which with a live stream never ends so is unworkable.
3) I don't understand why piping the STDOUT stream to the HTTP response doesn't work when streaming live yet if I save to a file I can stream this file easily to HTML5 clients using similar code. Maybe it's a timing issue as it takes a second for the FFMPEG spawn to start, connect to the IP camera and send chunks to node, and the node data events are irregular as well. However the bytestream should be exactly the same as saving to a file, and HTTP should be able to cater for delays.
4) When checking the network log from the HTTP client when streaming a MP4 file created by FFMPEG from the camera, I see there are 3 client requests: A general GET request for the video, which the HTTP server returns about 40Kb, then a partial content request with a byte range for the last 10K of the file, then a final request for the bits in the middle not loaded. Maybe the HTML5 client once it receives the first response is asking for the last part of the file to load the MP4 MOOV atom? If this is the case it won't work for streaming as there is no MOOV file and no end of the file.
5) When checking the network log when trying to stream live, I get an aborted initial request with only about 200 bytes received, then a re-request again aborted with 200 bytes and a third request which is only 2K long. I don't understand why the HTML5 client would abort the request as the bytestream is exactly the same as I can successfully use when streaming from a recorded file. It also seems node isn't sending the rest of the FFMPEG stream to the client, yet I can see the FFMPEG data in the .on event routine so it is getting to the FFMPEG node HTTP server.
6) Although I think piping the STDOUT stream to the HTTP response buffer should work, do I have to build an intermediate buffer and stream that will allow the HTTP partial content client requests to properly work like it does when it (successfully) reads a file? I think this is the main reason for my problems however I'm not exactly sure in Node how to best set that up. And I don't know how to handle a client request for the data at the end of the file as there is no end of file.
7) Am I on the wrong track with trying to handle 206 partial content requests, and should this work with normal 200 HTTP responses? HTTP 200 responses works fine for VLC so I suspect the HTML5 video client will only work with partial content requests?
As I'm still learning this stuff its difficult to work through the various layers of this problem (FFMPEG, node, streaming, HTTP, HTML5 video) so any pointers will be greatly appreciated. I have spent hours researching on this site and the net, and I have not come across anyone who has been able to do real time streaming in node but I can't be the first, and I think this should be able to work (somehow!).
EDIT 3: As of IOS 10, HLS will support fragmented mp4 files. The answer now, is to create fragmented mp4 assets, with a DASH and HLS manifest. > Pretend flash, iOS9 and below and IE 10 and below don't exist.
Everything below this line is out of date. Keeping it here for posterity.
EDIT 2: As people in the comments are pointing out, things change. Almost all browsers will support AVC/AAC codecs. iOS still requires HLS. But via adaptors like hls.js you can play HLS in MSE. The new answer is HLS+hls.js if you need iOS. or just Fragmented MP4 (ie DASH) if you don't
There are many reasons why video and, specifically, live video is very difficult. (Please note that the original question specified that HTML5 video is a requirement, but the asker stated Flash is possible in the comments. So immediately, this question is misleading)
First I will restate: THERE IS NO OFFICIAL SUPPORT FOR LIVE STREAMING OVER HTML5 . There are hacks, but your mileage may vary.
EDIT: since I wrote this answer Media Source Extensions have matured, and are now very close to becoming a viable option. They are supported on most major browsers. IOS continues to be a hold out.
Next, you need to understand that Video on demand (VOD) and live video are very different. Yes, they are both video, but the problems are different, hence the formats are different. For example, if the clock in your computer runs 1% faster than it should, you will not notice on a VOD. With live video, you will be trying to play video before it happens. If you want to join aa live video stream in progress, you need the data necessary to initialize the decoder, so it must be repeated in the stream, or sent out of band. With VOD, you can read the beginning of the file them seek to whatever point you wish.
Now let's dig in a bit.
Platforms:
Codecs:
Common Delivery methods for live video in browsers:
Common Delivery methods for VOD in browsers:
html5 video tag:
Lets look at which browsers support what formats
Safari:
Firefox
IE
Chrome
MP4 cannot be used for live video (NOTE: DASH is a superset of MP4, so don't get confused with that). MP4 is broken into two pieces: moov and mdat. mdat contains the raw audio video data. But it is not indexed, so without the moov, it is useless. The moov contains an index of all data in the mdat. But due to its format, it can not be 'flattened' until the timestamps and size of EVERY frame is known. It may be possible to construct an moov that 'fibs' the frame sizes, but is is very wasteful bandwidth wise.
So if you want to deliver everywhere, we need to find the least common denominator. You will see there is no LCD here without resorting to flash example:
The closest thing to an LCD is using HLS to get your iOS users, and flash for everyone else. My personal favorite is to encode HLS, then use flash to play HLS for everyone else. You can play HLS in flash via JW player 6, (or write your own HLS to FLV in AS3 like I did)
Soon, the most common way to do this will be HLS on iOS/Mac and DASH via MSE everywhere else (This is what Netflix will be doing soon). But we are still waiting for everyone to upgrade their browsers. You will also likely need a separate DASH/VP9 for Firefox (I know about open264; it sucks. It can't do video in main or high profile. So it is currently useless).
Thanks everyone especially szatmary as this is a complex question and has many layers to it, all which have to be working before you can stream live video. To clarify my original question and HTML5 video use vs flash - my use case has a strong preference for HTML5 because it is generic, easy to implement on the client and the future. Flash is a distant second best so lets stick with HTML5 for this question.
I learnt a lot through this exercise and agree live streaming is much harder than VOD (which works well with HTML5 video). But I did get this to work satisfactorily for my use case and the solution worked out to be very simple, after chasing down more complex options like MSE, flash, elaborate buffering schemes in Node. The problem was that FFMPEG was corrupting the fragmented MP4 and I had to tune the FFMPEG parameters, and the standard node stream pipe redirection over http that I used originally was all that was needed.
In MP4 there is a 'fragmentation' option that breaks the mp4 into much smaller fragments which has its own index and makes the mp4 live streaming option viable. But not possible to seek back into the stream (OK for my use case), and later versions of FFMPEG support fragmentation.
Note timing can be a problem, and with my solution I have a lag of between 2 and 6 seconds caused by a combination of the remuxing (effectively FFMPEG has to receive the live stream, remux it then send it to node for serving over HTTP). Not much can be done about this, however in Chrome the video does try to catch up as much as it can which makes the video a bit jumpy but more current than IE11 (my preferred client).
Rather than explaining how the code works in this post, check out the GIST with comments (the client code isn't included, it is a standard HTML5 video tag with the node http server address). GIST is here: https://gist.github.com/deandob/9240090
I have not been able to find similar examples of this use case, so I hope the above explanation and code helps others, especially as I have learnt so much from this site and still consider myself a beginner!
Although this is the answer to my specific question, I have selected szatmary's answer as the accepted one as it is the most comprehensive.
Take a look at JSMPEG project. There is a great idea implemented there — to decode MPEG in the browser using JavaScript. Bytes from encoder (FFMPEG, for example) can be transfered to browser using WebSockets or Flash, for example. If community will catch up, I think, it will be the best HTML5 live video streaming solution for now.
链接地址: http://www.djcxy.com/p/44704.html