Xcode 4 build succeeds, command line build fails?
I have a project in Xcode 4 (the latest non-beta version) that builds fine when built in Xcode itself. Specifically, the Ld command correctly uses the derived data directory (where build products, including a dependent static library, are placed).
However, when I build the same project from the command line, the Ld command fails, as it is trying to use the /build folder within the project, which is not being populated.
I've tried adjusting every build setting I know about, both in the parent and the dependent project.
Any ideas on where to start debugging this? I can provide more info as needed.
Edit 1: Full Xcode build command:
xcodebuild -project AppName.xcodeproj -target AppName -configuration "Config Name"
Where AppName
and Config Name
are both the correct values for the build.
Edit 2: Link (Ld) commands.
When built in Xcode (this works):
Ld /Users/james/Library/Developer/Xcode/DerivedData/AppName-apkmkuhwuccsbpblulxcsafyxkwa/Build/Products/Debug-iphonesimulator/AppName.app/AppName normal i386
cd /Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName
setenv MACOSX_DEPLOYMENT_TARGET 10.6
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/opt/local/bin:/usr/local/git/bin"
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/llvm-gcc-4.2 -arch i386 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.3.sdk -L/Users/james/Library/Developer/Xcode/DerivedData/AppName-apkmkuhwuccsbpblulxcsafyxkwa/Build/Products/Debug-iphonesimulator -L/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName -F/Users/james/Library/Developer/Xcode/DerivedData/AppName-apkmkuhwuccsbpblulxcsafyxkwa/Build/Products/Debug-iphonesimulator -filelist /Users/james/Library/Developer/Xcode/DerivedData/AppName-apkmkuhwuccsbpblulxcsafyxkwa/Build/Intermediates/AppName.build/Debug-iphonesimulator/AppName.build/Objects-normal/i386/AppName.LinkFileList -mmacosx-version-min=10.6 -lxml2 -all_load -ObjC -licucore -Xlinker -objc_abi_version -Xlinker 2 -lMyClientLibrary -lxml2 -lsqlite3.0 -framework Security -framework MessageUI -framework QuartzCore -framework MediaPlayer -framework MapKit -framework CoreLocation -framework AudioToolbox -lz.1.2.3 -framework MobileCoreServices -framework SystemConfiguration -framework CFNetwork -framework UIKit -framework Foundation -framework CoreGraphics -o /Users/james/Library/Developer/Xcode/DerivedData/AppName-apkmkuhwuccsbpblulxcsafyxkwa/Build/Products/Debug-iphonesimulator/AppName.app/AppName
When built from command line using build command above (this fails):
Ld "build/AppName.build/Prod Ad Hoc-iphoneos/AppName.build/Objects-normal/armv6/AppName" normal armv6
cd /Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName
setenv IPHONEOS_DEPLOYMENT_TARGET 4.0
setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/usr/X11/bin:/opt/local/bin"
/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -arch armv6 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk "-L/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName/build/Prod Ad Hoc-iphoneos" -L/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName "-F/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName/build/Prod Ad Hoc-iphoneos" -filelist "/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName/build/AppName.build/Prod Ad Hoc-iphoneos/AppName.build/Objects-normal/armv6/AppName.LinkFileList" -dead_strip -lxml2 -all_load -ObjC -licucore -miphoneos-version-min=4.0 -lMyClientLibrary -lxml2 -lsqlite3.0 -framework Security -framework MessageUI -framework QuartzCore -framework MediaPlayer -framework MapKit -framework CoreLocation -framework AudioToolbox -lz.1.2.3 -framework MobileCoreServices -framework SystemConfiguration -framework CFNetwork -framework UIKit -framework Foundation -framework CoreGraphics -o "/Users/james/Code/ClientName-Depot/NameOfProject/trunk/AppName/build/AppName.build/Prod Ad Hoc-iphoneos/AppName.build/Objects-normal/armv6/AppName"
Which returns:
ld: library not found for -lMyClientLibrary
collect2: ld returned 1 exit status
Command /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 failed with exit code 1
Ok, so nearly 6 (billable) hours later, I've gotten the build to work correctly in Xcode and on the command line (and on the build server, the whole point of this exercise).
Along the way I would fix one problem just to cause another - I would apparently fix the linker/Ld problem, only to cause problems in compilation ("SomeClass undeclared (first use in this function)" or "SomeHeader.h: No such file or directory" errors were common).
It was one of those times that I adjusted nearly every setting I could find, so it's hard to say what exactly what wrong and what exactly fixed it.
Things I think might have helped are are as follows:
$(BUILT_PRODUCTS_DIR)
$(BUILT_PRODUCTS_DIR)
(recursive) Final build command looks like this:
xcodebuild -workspace ClientName.xcworkspace -scheme AppName -configuration "ProdAdHoc" -sdk iphoneos -arch "armv6 armv7"
Some useful resources I used while debugging this issue:
Anyway, I hope I've peppered enough keywords above that anybody who has any similar build issues in the future stumbles upon this and finds it useful. I have no clue how a workflow I did many times in Xcode 3.x got so messed up when I moved to Xcode 4, here's hoping Apple is able to clean this up in future releases.
This was a heck of a learning experience for me, and going through all of this did seem to clear up issues with autocomplete I was having beforehand. I will say things could have been much worse; I could still be developing for SharePoint.
I ran in to the same issue yesterday and was able to work it out. In an effort to narrow down what worked for James, I'll point to what I had to do. I had to add a workspace and switch to running xcodebuild with workspace/scheme instead of project/target.
Using workspace/scheme forced xcodebuild to use the DerivedData folder instead of the build output folder under the main project. This allowed the linker to find the associated static library.
This blog post was hugely helpful:
http://blog.carbonfive.com/2011/05/04/automated-ad-hoc-builds-using-xcode-4/
I got this error when I was experimenting with my files I add the @implementation to the .h file and left the .m file empty. I don't believe this is your error but if anyone else gets it maybe check that you haven't done this.
链接地址: http://www.djcxy.com/p/50998.html下一篇: Xcode 4构建成功,命令行构建失败?