AnyEvent :: RabbitMQ封闭频道问题

我正在编写一个将消息发布到消息队列(RabbitMQ)的主程序。 该程序使用Perl 5编写,并使用AnyEvent :: RabbitMQ与RabbitMQ进行通信。

下面的最小示例(针对我遇到的问题)将通过同一个通道发送的第二个命令失败,并显示“通道关闭”错误。

use strictures 2;

use AnyEvent::RabbitMQ;

main();

############################################################################
sub main {
  _log( debug => 'main' );
  my $condvar = AnyEvent->condvar;
  my $ar      = AnyEvent::RabbitMQ->new;
  $ar->load_xml_spec;
  _log( debug => 'Connecting to RabbitMQ...' );
  $ar->connect(
    host            => 'localhost',
    port            => 5672,
    user            => 'guest',
    pass            => 'guest',
    vhost           => '/',
    timeout         => 1,
    tls             => 0,
    on_success      => sub { _on_connect_success( $condvar, $ar, @_ ) },
    on_failure      => sub { _error( $condvar, $ar, 'failure', @_ ) },
    on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
    on_return       => sub { _error( $condvar, $ar, 'return', @_ ) },
    on_close        => sub { _error( $condvar, $ar, 'close', @_ ) },
  );
  $condvar->recv;
  $ar->close;
  return;
}

############################################################################
sub _on_connect_success {
  my ( $condvar, $ar, $new_ar ) = @_;
  _log( debug => 'Connected to RabbitMQ.' );
  _open_channel( $condvar, $new_ar );
  return;
}

############################################################################
sub _open_channel {
  my ( $condvar, $ar ) = @_;
  _log( debug => 'Opening RabbitMQ channel...' );
  $ar->open_channel(
    on_success => sub { _on_open_channel_success( $condvar, $ar, @_ ) },
    on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
    on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
    on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
    on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
  );
  return;
}

############################################################################
sub _on_open_channel_success {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => 'Opened RabbitMQ channel.' );
  _declare_queue( $condvar, $ar, $channel );
  return;
}

############################################################################
sub _declare_queue {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => 'Declaring RabbitMQ queue...' );
  $channel->declare_queue(
    queue       => 'test',
    auto_delete => 1,
    passive     => 0,
    durable     => 0,
    exclusive   => 0,
    no_ack      => 1,
    ticket      => 0,
    on_success =>
      sub { _on_declare_queue_success( $condvar, $ar, $channel, @_ ) },
    on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
    on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
    on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
    on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
  );
  return;
}

############################################################################
sub _on_declare_queue_success {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => 'Declared RabbitMQ queue.' );
  _bind_queue( $condvar, $ar, $channel );
  return;
}

############################################################################
sub _bind_queue {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => 'Binding RabbitMQ queue...' );
  $channel->bind_queue(
    queue       => 'test',
    exchange    => '',
    routing_key => '',
    on_success => sub { _on_bind_queue_success( $condvar, $ar, $channel, @_ ) },
    on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
    on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
    on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
    on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
  );
  return;
}

############################################################################
sub _on_bind_queue_success {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => 'Binded RabbitMQ queue.' );
  _log( info  => 'Master ready to publish messages.' );
  _publish_message( $condvar, $ar, $channel, 'Hello, world!' );
  return;
}

############################################################################
sub _publish_message {
  my ( $condvar, $ar, $channel, $message ) = @_;
  _log( debug => "Publishing RabbitMQ message ($message)..." );
  $channel->publish(
    queue       => 'test',
    exchange    => '',
    routing_key => '',
    body        => $message,
    header      => {},
    mandatory   => 0,
    immediate   => 0,
    on_success =>
      sub { _on_publish_message_success( $condvar, $ar, $channel, @_ ) },
    on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
    on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
    on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
    on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
    on_ack          => sub { _error( $condvar, $ar, 'ack',          @_ ) },
    on_nack         => sub { _error( $condvar, $ar, 'nack',         @_ ) },
  );
  return;
}

############################################################################
sub _on_publish_message_success {
  my ( $condvar, $ar, $channel ) = @_;
  _log( debug => "Published RabbitMQ message." );
  sleep 1;
  _publish_message( $condvar, $ar, $channel, 'Hello, world! Again ' . time );
  return;
}

############################################################################
sub _error {
  my ( $condvar, $ar, $type, @error ) = @_;
  _log( error => sprintf '%s - %s', $type, join ', ', @error );
  $condvar->send( $condvar, $ar, $type, @error );
  return;
}

############################################################################
sub _log {
  my ( $level, $message ) = @_;
  my @time = gmtime time;
  $time[5] += 1900;
  $time[4] += 1;
  my $time = sprintf '%04d-%02d-%02dT%02d:%02d:%02d+00:00', @time[ 5, 4, 3, 2, 1, 0 ];
  my @caller0    = caller(0);
  my @caller1    = caller(1);
  my $subroutine = $caller1[3];
  $subroutine =~ s/^$caller0[0]:://;
  print STDERR "$time [$level] $message at $caller0[1] line $caller0[2] ($subroutine; from $caller1[1] line $caller1[2])n";
  return;
}

该计划应该:

  • 连接到RabbitMQ
  • 打开一个RabbitMQ频道
  • 声明一个simpe队列(名为“test”)
  • 绑定到该队列(名为“test”)
  • 发布消息(“Hello,world!”)
  • 成功发布消息后等待一秒钟,然后发布另一条消息
  • 这个程序(主程序)不应该使用消息。 还有其他的方案来完成这项工作。

    最简单的例子(见上)将产生以下输出:

    2015-08-12T13:02:07+00:00 [debug] main at minimal.pl line 9 (main; from minimal.pl line 5)
    2015-08-12T13:02:07+00:00 [debug] Connecting to RabbitMQ... at minimal.pl line 13 (main; from minimal.pl line 5)
    2015-08-12T13:02:07+00:00 [debug] Connected to RabbitMQ. at minimal.pl line 36 (_on_connect_success; from minimal.pl line 22)
    2015-08-12T13:02:07+00:00 [debug] Opening RabbitMQ channel... at minimal.pl line 44 (_open_channel; from minimal.pl line 37)
    2015-08-12T13:02:07+00:00 [debug] Opened RabbitMQ channel. at minimal.pl line 58 (_on_open_channel_success; from minimal.pl line 46)
    2015-08-12T13:02:07+00:00 [debug] Declaring RabbitMQ queue... at minimal.pl line 66 (_declare_queue; from minimal.pl line 59)
    2015-08-12T13:02:07+00:00 [debug] Declared RabbitMQ queue. at minimal.pl line 88 (_on_declare_queue_success; from minimal.pl line 76)
    2015-08-12T13:02:07+00:00 [debug] Binding RabbitMQ queue... at minimal.pl line 96 (_bind_queue; from minimal.pl line 89)
    2015-08-12T13:02:07+00:00 [error] failure - Channel closed at minimal.pl line 155 (_error; from minimal.pl line 102)
    2015-08-12T13:02:07+00:00 [error] close - Net::AMQP::Frame::Method=HASH(0x38fe1c8) at minimal.pl line 155 (_error; from minimal.pl line 50)
    

    为什么AnyEvent::RabbitMQ或RabbitMQ本身关闭通道(不是连接或我错过了什么)?


    如果你看看RabbitMQ服务器日志,你会看到类似这样的东西:

    {amqp_error,access_refused,“默认交易所不允许的操作”,“queue.bind”}

    显然它不会让你在默认交换中绑定一个队列。 所以你需要首先声明并绑定你自己的交换。

    sub _declare_exchange {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declaring RabbitMQ exchange...' );
      $channel->declare_exchange(
        exchange        => 'testest',
        type            => 'fanout',
        on_success =>
          sub { _on_declare_exchange_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_declare_exchange_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declared RabbitMQ exchange.' );
      _bind_exchange( $condvar, $ar, $channel );
      return;
    }
    
    ############################################################################
    sub _bind_exchange {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Binding RabbitMQ exchange...' );
      $channel->bind_exchange(
        source      => 'testest',
        destination => 'testest',
        routing_key => '',
        on_success => sub { _on_bind_exchange_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    

    一旦你设置了这些子集,告诉你的程序使用这个自定义交换。

    sub _on_open_channel_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Opened RabbitMQ channel.' );
      $channel->confirm;
      _declare_exchange( $condvar, $ar, $channel );
      return;
    }
    

    当您向队列发送消息时,需要使用$channel->confirm$channel->confirm RabbitMQ的确认结果。 如果你不这样做,成功处理程序将永远不会被调用,因为没有成功的回应。

    然后在您的_bind_queue您需要将交换添加到bind_queue()调用。

      $channel->bind_queue(
        queue       => 'test',
        exchange    => 'testest', # <-- here
        routing_key => '',
        # ...
      );
    

    带有publish()调用的_publish_message需要完成相同的工作。 在那里你也应该用实际处理确认的东西来替换on_ack处理程序。 我想你打算这样做,但有一个复制/粘贴错误1。

    $channel->publish(
      queue       => 'test',
      exchange    => 'testest', # <-- here
      routing_key => '',
      # ...
      on_ack          => sub { 
      _on_publish_message_success( $condvar, $ar, $channel, @_ );
      },
    );
    

    还有一件事是,在使用_on_publish_message_success时, _on_publish_message_success中的sleep调用不是一个好主意,因为这将停止整个程序。 改用AE::timer

    my $t; 
    $t = AE::timer(1,0,sub {
      _publish_message( $condvar, $ar, $channel, 'Hello, world! Again ' . time );
      undef $t;
    });
    

    以下是包含所有更改的完整代码。

    use strictures 2;
    
    use AnyEvent::RabbitMQ;
    
    main();
    
    ############################################################################
    sub main {
      _log( debug => 'main' );
      my $condvar = AnyEvent->condvar;
      my $ar      = AnyEvent::RabbitMQ->new;
      $ar->load_xml_spec;
      _log( debug => 'Connecting to RabbitMQ...' );
      $ar->connect(
        host            => 'localhost',
        port            => 5672,
        user            => 'guest',
        pass            => 'guest',
        vhost           => '/guest',
        timeout         => 1,
        tls             => 0,
        on_success      => sub { _on_connect_success( $condvar, $ar, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure', @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return', @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close', @_ ) },
      );
      $condvar->recv;
      $ar->close;
      return;
    }
    
    ############################################################################
    sub _on_connect_success {
      my ( $condvar, $ar, $new_ar ) = @_;
      _log( debug => 'Connected to RabbitMQ.' );
      _open_channel( $condvar, $new_ar );
      return;
    }
    
    ############################################################################
    sub _open_channel {
      my ( $condvar, $ar ) = @_;
      _log( debug => 'Opening RabbitMQ channel...' );
      $ar->open_channel(
        on_success => sub { _on_open_channel_success( $condvar, $ar, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_open_channel_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Opened RabbitMQ channel.' );
      $channel->confirm;
      _declare_exchange( $condvar, $ar, $channel );
      return;
    }
    
    ############################################################################
    sub _declare_exchange {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declaring RabbitMQ exchange...' );
      $channel->declare_exchange(
        exchange        => 'testest',
        type            => 'fanout',
        on_success =>
          sub { _on_declare_exchange_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_declare_exchange_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declared RabbitMQ exchange.' );
      _bind_exchange( $condvar, $ar, $channel );
      return;
    }
    
    ############################################################################
    sub _bind_exchange {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Binding RabbitMQ exchange...' );
      $channel->bind_exchange(
        source      => 'testest',
        destination => 'testest',
        routing_key => '',
        on_success => sub { _on_bind_exchange_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_bind_exchange_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Binded RabbitMQ exchange.' );
      _declare_queue( $condvar, $ar, $channel );
      return;
    }
    
    
    ############################################################################
    sub _declare_queue {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declaring RabbitMQ queue...' );
      $channel->declare_queue(
        queue       => 'test',
        auto_delete => 1,
        passive     => 0,
        durable     => 0,
        exclusive   => 0,
        no_ack      => 1,
        ticket      => 0,
        on_success =>
          sub { _on_declare_queue_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_declare_queue_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Declared RabbitMQ queue.' );
      _bind_queue( $condvar, $ar, $channel );
      return;
    }
    
    ############################################################################
    sub _bind_queue {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Binding RabbitMQ queue...' );
      $channel->bind_queue(
        queue       => 'test',
        exchange    => 'testest',
        routing_key => '',
        on_success => sub { _on_bind_queue_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_bind_queue_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => 'Binded RabbitMQ queue.' );
      _log( info  => 'Master ready to publish messages.' );
      _publish_message( $condvar, $ar, $channel, 'Hello, world!' );
      return;
    }
    
    ############################################################################
    sub _publish_message {
      my ( $condvar, $ar, $channel, $message ) = @_;
      _log( debug => "Publishing RabbitMQ message ($message)..." );
      $channel->publish(
        queue       => 'test',
        exchange    => 'testest',
        routing_key => '',
        body        => $message,
        header      => {},
        mandatory   => 0,
        immediate   => 0,
        on_success =>
          sub { _on_publish_message_success( $condvar, $ar, $channel, @_ ) },
        on_failure      => sub { _error( $condvar, $ar, 'failure',      @_ ) },
        on_read_failure => sub { _error( $condvar, $ar, 'read_failure', @_ ) },
        on_return       => sub { _error( $condvar, $ar, 'return',       @_ ) },
        on_close        => sub { _error( $condvar, $ar, 'close',        @_ ) },
        on_ack          => sub { 
            _on_publish_message_success( $condvar, $ar, $channel, @_ );
    #        _error( $condvar, $ar, 'ack',          @_ )    
        },
        on_nack         => sub { _error( $condvar, $ar, 'nack',         @_ ) },
      );
      return;
    }
    
    ############################################################################
    sub _on_publish_message_success {
      my ( $condvar, $ar, $channel ) = @_;
      _log( debug => "Published RabbitMQ message." );
      my $t; $t=AE::timer(1,0,sub {
          _publish_message( $condvar, $ar, $channel, 'Hello, world! Again ' . time );
          undef $t;
      });
      return;
    }
    
    ############################################################################
    sub _error {
      my ( $condvar, $ar, $type, @error ) = @_;
      _log( error => sprintf '%s - %s', $type, join ', ', @error );
      $condvar->send( $condvar, $ar, $type, @error );
      return;
    }
    
    ############################################################################
    sub _log {
      my ( $level, $message ) = @_;
      my @time = gmtime time;
      $time[5] += 1900;
      $time[4] += 1;
      my $time = sprintf '%04d-%02d-%02dT%02d:%02d:%02d+00:00', @time[ 5, 4, 3, 2, 1, 0 ];
      my @caller0    = caller(0);
      my @caller1    = caller(1);
      my $subroutine = $caller1[3];
      $subroutine =~ s/^$caller0[0]:://;
      print STDERR "$time [$level] $message at $caller0[1] line $caller0[2] ($subroutine; from $caller1[1] line $caller1[2])n";
      return;
    }
    

    1)在某些地方,你需要为你的同事买一杯啤酒:)

    链接地址: http://www.djcxy.com/p/59237.html

    上一篇: AnyEvent::RabbitMQ issues with closed channels

    下一篇: RabbitMQ acks immediately(possible confirm confusion)