What is Ember RunLoop and how does it work?
I am trying to understand how Ember RunLoop works and what makes it tick. I have looked at the documentation, but still have many questions about it. I am interested in understanding better how RunLoop works so I can choose appropriate method within its name space, when I have to defer execution of some code for later time.
Forgive me if these are very basic questions, I think understanding these will help noobs like me use Ember better.
Update 10/9/2013: Check out this interactive visualization of the run loop: https://machty.s3.amazonaws.com/ember-run-loop-visual/index.html
Update 5/9/2013: all the basic concepts below are still up to date, but as of this commit, the Ember Run Loop implementation has been split off into a separate library called backburner.js, with some very minor API differences.
First off, read these:
http://blog.sproutcore.com/the-run-loop-part-1/
http://blog.sproutcore.com/the-run-loop-part-2/
They're not 100% accurate to Ember, but the core concepts and motivation behind the RunLoop still generally apply to Ember; only some implementation details differ. But, on to your questions:
When does Ember RunLoop start. Is it dependant on Router or Views or Controllers or something else?
All of the basic user events (eg keyboard events, mouse events, etc) will fire up the run loop. This guarantees that whatever changes made to bound properties by the captured (mouse/keyboard/timer/etc) event are fully propagated throughout Ember's data-binding system before returning control back to the system. So, moving your mouse, pressing a key, clicking a button, etc., all launch the run loop.
how long does it approximately take (I know this is rather silly to asks and dependant on many things but I am looking for a general idea, or maybe if there is a minimum or maximum time a runloop may take)
At no point will the RunLoop ever keep track of how much time it's taking to propagate all the changes through the system and then halt the RunLoop after reaching a maximum time limit; rather, the RunLoop will always run to completion, and won't stop until all the expired timers have been called, bindings propagated, and perhaps their bindings propagated, and so on. Obviously, the more changes that need to be propagated from a single event, the longer the RunLoop will take to finish. Here's a (pretty unfair) example of how the RunLoop can get bogged down with propagating changes compared to another framework (Backbone) that doesn't have a run loop: http://jsfiddle.net/jashkenas/CGSd5/ . Moral of the story: the RunLoop's really fast for most things you'd ever want to do in Ember, and it's where much of Ember's power lies, but if you find yourself wanting to animate 30 circles with Javascript at 60 frames per second, there might be better ways to go about it than relying on Ember's RunLoop.
Is RunLoop being executed at all times, or is it just indicating a period of time from beginning to end of execution and may not run for some time.
It is not executed at all times -- it has to return control back to the system at some point or else your app would hang -- it's different from, say, a run loop on a server that has a while(true) and goes on for infinity until the server gets a signal to shut down... the Ember RunLoop has no such while(true) but is only spun up in response to user/timer events.
If a view is created from within one RunLoop, is it guaranteed that all its content will make it into the DOM by the time the loop ends?
Let's see if we can figure that out. One of the big changes from SC to Ember RunLoop is that, instead of looping back and forth between invokeOnce and invokeLast (which you see in the diagram in the first link about SproutCore's RL), Ember provides you a list of 'queues' that, in the course of a run loop, you can schedule actions (functions to be called during the run loop) to by specifying which queue the action belongs in (example from the source: Ember.run.scheduleOnce('render', bindView, 'rerender'); ).
If you look at run_loop.js in the source code, you see Ember.run.queues = ['sync', 'actions', 'destroy', 'timers']; , yet if you open your JavaScript debugger in the browser in an Ember app and evaluate Ember.run.queues , you get a fuller list of queues: ["sync", "actions", "render", "afterRender", "destroy", "timers"] . Ember keeps their codebase pretty modular, and they make it possible for your code, as well as its own code in a separate part of the library, to insert more queues. In this case, the Ember Views library inserts render and afterRender queues, specifically after the actions queue. I'll get to why that might be in a second. First, the RunLoop algorithm:
The RunLoop algorithm is pretty much the same as described in the SC run loop articles above:
.begin() and .end() , only in Ember you'll want to instead run your code within Ember.run , which will internally call begin and end for you. (Only internal run loop code in the Ember code base still uses begin and end , so you should just stick with Ember.run ) end() is called, the RunLoop then kicks into gear to propagate every single change made by the chunk of code passed to the Ember.run function. This includes propagating the values of bound properties, rendering view changes to the DOM, etc etc. The order in which these actions (binding, rendering DOM elements, etc) are performed is determined by the Ember.run.queues array described above: sync . It'll run all of the actions that were scheduled into the sync queue by the Ember.run code. These actions may themselves also schedule more actions to be performed during this same RunLoop, and it's up to the RunLoop to make sure it performs every action until all the queues are flushed. The way it does this is, at the end of every queue, the RunLoop will look through all the previously flushed queues and see if any new actions have been scheduled. If so, it has to start at the beginning of the earliest queue with unperformed scheduled actions and flush out the queue, continuing to trace its steps and start over when necessary until all of the queues are completely empty. That's the essence of the algorithm. That's how bound data gets propagated through the app. You can expect that once a RunLoop runs to completion, all of the bound data will be fully propagated. So, what about DOM elements?
The order of the queues, including the ones added in by the Ember Views library, is important here. Notice that render and afterRender come after sync , and action . The sync queue contains all the actions for propagating bound data. ( action , after that, is only sparsely used in the Ember source). Based on the above algorithm, it is guaranteed that by the time the RunLoop gets to the render queue, all of the data-bindings will have finished synchronizing. This is by design: you wouldn't want to perform the expensive task of rendering DOM elements before sync'ing the data-bindings, since that would likely require re-rendering DOM elements with updated data -- obviously a very inefficient and error-prone way of emptying all of the RunLoop queues. So Ember intelligently blasts through all the data-binding work it can before rendering the DOM elements in the render queue.
So, finally, to answer your question, yes, you can expect that any necessary DOM renderings will have taken place by the time Ember.run finishes. Here's a jsFiddle to demonstrate: http://jsfiddle.net/machty/6p6XJ/328/
Other things to know about the RunLoop
Observers vs. Bindings
It's important to note that Observers and Bindings, while having the similar functionality of responding to changes in a "watched" property, behave totally differently in the context of a RunLoop. Binding propagation, as we've seen, gets scheduled into the sync queue to eventually be executed by the RunLoop. Observers, on the other hand, fire immediately when the watched property changes without having to be first scheduled into a RunLoop queue. If an Observer and a binding all "watch" the same property, the observer will always be called 100% of the time earlier than the binding will be updated.
scheduleOnce and Ember.run.once
One of the big efficiency boosts in Ember's auto-updating templates is based on the fact that, thanks to the RunLoop, multiple identical RunLoop actions can be coalesced ("debounced", if you will) into a single action. If you look into the run_loop.js internals, you'll see the functions that facilitate this behavior are the related functions scheduleOnce and Em.run.once . The difference between them isn't so important as knowing they exist, and how they can discard duplicate actions in queue to prevent a lot of bloated, wasteful calculation during the run loop.
What about timers?
Even though 'timers' is one of the default queues listed above, Ember only makes reference to the queue in their RunLoop test cases. It seems that such a queue would have been used in the SproutCore days based on some of the descriptions from the above articles about timers being the last thing to fire. In Ember, the timers queue isn't used. Instead, the RunLoop can be spun up by an internally managed setTimeout event (see the invokeLaterTimers function), which is intelligent enough to loop through all the existing timers, fire all the ones that have expired, determine the earliest future timer, and set an internal setTimeout for that event only, which will spin up the RunLoop again when it fires. This approach is more efficient than having each timer call setTimeout and wake itself up, since in this case, only one setTimeout call needs to be made, and the RunLoop is smart enough to fire all the different timers that might be going off at the same time.
Further debouncing with the sync queue
Here's a snippet from the run loop, in the middle of a loop through all the queues in the run loop. Note the special case for the sync queue: because sync is a particularly volatile queue, in which data is being propagated in every direction, Ember.beginPropertyChanges() is called to prevent any observers from being fired, followed by a call to Ember.endPropertyChanges . This is wise: if in the course of flushing the sync queue, it's entirely possible that a property on an object will change multiple times before resting on its final value, and you wouldn't want to waste resources by immediately firing observers per every single change.
if (queueName === 'sync')
{
log = Ember.LOG_BINDINGS;
if (log)
{
Ember.Logger.log('Begin: Flush Sync Queue');
}
Ember.beginPropertyChanges();
Ember.tryFinally(tryable, Ember.endPropertyChanges);
if (log)
{
Ember.Logger.log('End: Flush Sync Queue');
}
}
else
{
forEach.call(queue, iter);
}
Hope this helps. I definitely had to learn quite a bit just to write this thing, which was kind of the point.
链接地址: http://www.djcxy.com/p/65810.html上一篇: Ember方式实现联系我们表格