PHP mail function doesn't complete sending of e
<?php
$name = $_POST['name'];
$email = $_POST['email'];
$message = $_POST['message'];
$from = 'From: yoursite.com';
$to = 'contact@yoursite.com';
$subject = 'Customer Inquiry';
$body = "From: $namen E-Mail: $emailn Message:n $message";
if ($_POST['submit']) {
if (mail ($to, $subject, $body, $from)) {
echo '<p>Your message has been sent!</p>';
} else {
echo '<p>Something went wrong, go back and try again!</p>';
}
}
?>
I've tried creating a simple mail form. The form itself is on my index.html page, but submits to a separate "thank you for your submission" page, thankyou.php , where the above php code is embedded. The code submits perfectly, but never sends an email. please help.
Although there are portions of this answer that apply to only to the usage of the mail() function itself, many of these troubleshooting steps can be applied to any PHP mailing system.
There are a variety of reasons your script appears to not be sending emails. It's difficult to diagnose these things unless there is an obvious syntax error. Without one you need to run through the checklist below to find any potential pitfalls you may be encountering.
Make sure error reporting is enabled and set to report all errors
Error reporting is essential to rooting out bugs in your code and general errors that PHP encounters. Error reporting needs to be enabled to receive these errors. Placing the following code at the top of your PHP files (or in a master configuration file) will enable error reporting.
error_reporting(-1);
ini_set('display_errors', 'On');
set_error_handler("var_dump");
See this Stack Overflow answer for more details on this.
Make sure the mail() function is called
It may seem silly but a common error is to forget to actually place the mail() function in your code. Make sure it is there and not commented out.
Make sure the mail() function is called correctly
bool mail ( string $to , string $subject , string $message [, string $additional_headers [, string $additional_parameters ]] )
The mail function takes three required parameters and optionally a fourth and fifth one. If your call to mail() does not have at least three parameters it will fail.
If your call to mail() does not have the correct parameters in the correct order it will also fail.
Check the server's mail logs
Your web server should be logging all attempts to send emails through it. The location of these logs will vary (you may need to ask your server administrator where they are located) but they can commonly be found in a user's root directory under logs . Inside will be error messages the server reported, if any, related to your attempts to send emails.
Check for Port connection failure
Port block is a very common problem which most developers face while integrating their code to deliver emails using SMTP. And, this can be easily traced at the server maillogs (the location of server of mail log can vary from server to server, as explained above). In case you are on a shared hosting server, the ports 25 and 587 remain blocked by default. This block is been purposely done by your hosting provider. This is true even for some of the dedicated servers. When these ports are blocked, try to connect using port 2525. If you find that port is also blocked, then the only solution is to contact your hosting provider to unblock these ports.
Most of the hosting providers block these email ports to protect their network from sending any spam emails.
Use ports 25 or 587 for plain/TLS connections and port 465 for SSL connections. For most users, it is suggested to use port 587 to avoid rate limits set by some hosting providers.
Don't use the error suppression operator
When the error suppression operator @ is prepended to an expression in PHP, any error messages that might be generated by that expression will be ignored. There are circumstances where using this operator is necessary but sending mail is not one of them.
If your code contains @mail(...) then you may be hiding important error messages that will help you debug this. Remove the @ and see if any errors are reported.
It's only advisable when you check with error_get_last() right afterwards for concrete failures.
Check the mail() return value
The mail() function:
Returns TRUE if the mail was successfully accepted for delivery, FALSE otherwise. It is important to note that just because the mail was accepted for delivery, it does NOT mean the mail will actually reach the intended destination.
This is important to note because:
FALSE return value you know the error lies with your server accepting your mail. This probably isn't a coding issue but a server configuration issue. You need to speak to your system administrator to find out why this is happening. TRUE return value it does not mean your email will definitely be sent. It just means the email was sent to its respective handler on the server successfully by PHP. There are still more points of failure outside of PHP's control that can cause the email to not be sent. So FALSE will help point you in the right direction whereas TRUE does not necessarily mean your email was sent successfully. This is important to note!
Make sure your hosting provider allows you to send emails and does not limit mail sending
Many shared webhosts, especially free webhosting providers, either do not allow emails to be sent from their servers or limit the amount that can be sent during any given time period. This is due to their efforts to limit spammers from taking advantage of their cheaper services.
If you think your host has emailing limits or blocks the sending of emails, check their FAQs to see if they list any such limitations. Otherwise, you may need to reach out to their support to verify if there are any restrictions in place around the sending of emails.
Check spam folders; prevent emails from being flagged as spam
Oftentimes, for various reasons, emails sent through PHP (and other server-side programming languages) end up in a recipient's spam folder. Always check there before troubleshooting your code.
To avoid mail sent through PHP from being sent to a recipient's spam folder, there are various things you can do, both in your PHP code and otherwise, to minimize the chances your emails are marked as spam. Good tips from Michiel de Mare include:
"John Smith" <john@blacksmiths-international.com> ). See How do you make sure email you send programmatically is not automatically marked as spam? for more on this topic.
Make sure all mail headers are supplied
Some spam software will reject mail if it is missing common headers such as "From" and "Reply-to":
$headers = array("From: from@example.com",
"Reply-To: replyto@example.com",
"X-Mailer: PHP/" . PHP_VERSION
);
$headers = implode("rn", $headers);
mail($to, $subject, $message, $headers);
Make sure mail headers have no syntax errors
Invalid headers are just as bad as having no headers. One incorrect character could be all it takes to derail your email. Double-check to make sure your syntax is correct as PHP will not catch these errors for you.
$headers = array("From from@example.com", // missing colon
"Reply To: replyto@example.com", // missing hyphen
"X-Mailer: "PHP"/" . PHP_VERSION // bad quotes
);
Make sure the recipient value is correct
Sometimes the problem is as simple as having an incorrect value for the recipient of the email. This can be due to using an incorrect variable.
$to = 'user@example.com';
// other variables ....
mail($recipient, $subject, $message, $headers); // $recipient should be $to
Another way to test this is to hard code the recipient value into the mail() function call:
mail('user@example.com', $subject, $message, $headers);
This can apply to all of the mail() parameters.
Send to multiple accounts
To help rule out email account issues, send your email to multiple email accounts at different email providers. If your emails are not arriving at a user's Gmail account, send the same emails to a Yahoo account, a Hotmail account, and a regular POP3 account (like your ISP-provided email account).
If the emails arrive at all or some of the other email accounts, you know your code is sending emails but it is likely that the email account provider is blocking them for some reason. If the email does not arrive at any email account, the problem is more likely to be related to your code.
Make sure the code matches the form method
If you have set your form method to POST , make sure you are using $_POST to look for your form values. If you have set it to GET or didn't set it at all, make sure you using $_GET to look for your form values.
Make sure the Web host supports sending email
Some Web hosting providers do not allow or enable the sending of emails through their servers. The reasons for this may vary but if they have disabled the sending of mail you will need to use an alternative method that uses a third party to send those emails for you.
An email to their technical support (after a trip to their online support or FAQ) should clarify if email capabilities are available on your server.
Make sure the localhost mail server is configured
If you are developing on your local workstation using WAMP, MAMP, or XAMPP, an email server is probably not installed on your workstation. Without one, PHP cannot send mail by default.
You can overcome this by installing a basic mail server. For Windows you can use the free Mercury Mail.
You can also use SMTP to send your emails. See this great answer from Vikas Dwivedi to learn how to do this.
Enable PHP's custom mail.log
In addition to your MTA's and PHP's log file, you can enable logging for the mail() function specifically. It doesn't record the complete SMTP interaction, but at least function call parameters and invocation script.
ini_set("mail.log", "/tmp/mail.log");
ini_set("mail.add_x_header", TRUE);
See http://php.net/manual/en/mail.configuration.php for details. (It's best to enable these options in the php.ini or .user.ini or .htaccess perhaps.)
Check with a mail testing service
There are various delivery and spamminess checking services you can utilize to test your MTA/webserver setup. Typically you send a mail probe To: their address, then get a delivery report and more concrete failures or analyzations later:
Use a different mailer
PHP's built in mail() function is handy and often gets the job done but it has its shortcomings. Fortunately there are alternatives that offer more power and flexibility including handling a lot of the issues outlined above:
All of which can be combined with a professional SMTP server/service provider. (Because typical 08/15 shared webhosting plans are hit or miss when it comes to email setup/configurability.)
在邮件功能中添加邮件标题
$header = "From: noreply@example.comrn";
$header.= "MIME-Version: 1.0rn";
$header.= "Content-Type: text/html; charset=ISO-8859-1rn";
$header.= "X-Priority: 1rn";
$status = mail($to, $subject, $message, $header);
if($status)
{
echo '<p>Your mail has been sent!</p>';
} else {
echo '<p>Something went wrong, Please try again!</p>';
}
上一篇: 如何解决语法错误，意外的T
下一篇: PHP邮件功能没有完成e的发送