C++ performance vs. Java/C#
My understanding is that C/C++ produces native code to run on a particular machine architecture. Conversely, languages like Java and C# run on top of a virtual machine which abstracts away the native architecture. Logically it would seem impossible for Java or C# to match the speed of C++ because of this intermediate step, however I've been told that the latest compilers ("hot spot") can attain this speed or even exceed it.
Perhaps this is more of a compiler question than a language question, but can anyone explain in plain English how it is possible for one of these virtual machine languages to perform better than a native language?
Generally, C# and Java can be just as fast or faster because the JIT compiler -- a compiler that compiles your IL the first time it's executed -- can make optimizations that a C++ compiled program cannot because it can query the machine. It can determine if the machine is Intel or AMD; Pentium 4, Core Solo, or Core Duo; or if supports SSE4, etc.
A C++ program has to be compiled beforehand usually with mixed optimizations so that it runs decently well on all machines, but is not optimized as much as it could be for a single configuration (ie processor, instruction set, other hardware).
Additionally certain language features allow the compiler in C# and Java to make assumptions about your code that allows it to optimize certain parts away that just aren't safe for the C/C++ compiler to do. When you have access to pointers there's a lot of optimizations that just aren't safe.
Also Java and C# can do heap allocations more efficiently than C++ because the layer of abstraction between the garbage collector and your code allows it to do all of its heap compression at once (a fairly expensive operation).
Now I can't speak for Java on this next point, but I know that C# for example will actually remove methods and method calls when it knows the body of the method is empty. And it will use this kind of logic throughout your code.
So as you can see, there are lots of reasons why certain C# or Java implementations will be faster.
Now this all said, specific optimizations can be made in C++ that will blow away anything that you could do with C#, especially in the graphics realm and anytime you're close to the hardware. Pointers do wonders here.
So depending on what you're writing I would go with one or the other. But if you're writing something that isn't hardware dependent (driver, video game, etc), I wouldn't worry about the performance of C# (again can't speak about Java). It'll do just fine.
One the Java side, @Swati points out a good article:
https://www.ibm.com/developerworks/library/j-jtp09275
JIT vs. Static Compiler
As already said in the previous posts, JIT can compile IL/bytecode into native code at runtime. The cost of that was mentionned, but not to its conclusion:
JIT has one massive problem is that it can't compile everything: JIT compiling takes time, so the JIT will compile only some parts of the code, whereas a static compiler will produce a full native binary: For some kind of programs, the static compiler will simply easily outperform the JIT.
Of course, C# (or Java, or VB) is usually faster to produce viable and robust solution than is C++ (if only because C++ has complex semantics, and C++ standard library, while interesting and powerful, is quite poor when compared with the full scope of the standard library from .NET or Java), so usually, the difference between C++ and .NET or Java JIT won't be visible to most users, and for those binaries that are critical, well, you can still call C++ processing from C# or Java (even if this kind of native calls can be quite costly in themselves)...
C++ metaprograming
Note that usually, you are comparing C++ runtime code with its equivalent in C# or Java. But C++ has one feature that can outperform Java/C# out of the box, that is template metaprograming: The code processing will be done at compilation time (thus, increasing vastly compilation time), resulting into zero (or almost zero) runtime.
I have yet so see a real life effect on this (I played only with concepts, but by then, the difference was seconds of execution for JIT, and zero for C++), but this is worth mentioning, alongside the fact template metaprograming is not trivial...
Edit 2011-06-10: In C++, playing with types is done at compile time, meaning producing generic code which calls non-generic code (eg a generic parser from string to type T, calling standard library API for types T it recognizes, and making the parser easily extensible by its user) is very easy and very efficient, whereas the equivalent in Java or C# is painful at best to write, and will always be slower and resolved at runtime even when the types are known at compile time, meaning your only hope is for the JIT to inline the whole thing.
...
Edit 2011-09-20: The team behind Blitz++ (Homepage, Wikipedia) went that way, and apparently, their goal is to reach FORTRAN's performance on scientific calculations by moving as much as possible from runtime execution to compilation time, via C++ template metaprogramming. So the "I have yet so see a real life effect on this" part I wrote above apparently does exist in real life.
Native C++ Memory Usage
C++ has a memory usage different from Java/C#, and thus, has different advantages/flaws.
No matter the JIT optimization, nothing will go has fast as direct pointer access to memory (let's ignore for a moment processor caches, etc.). So, if you have contiguous data in memory, accessing it through C++ pointers (ie C pointers... Let's give Caesar its due) will goes times faster than in Java/C#. And C++ has RAII, which makes a lot of processing a lot easier than in C# or even in Java. C++ does not need using to scope the existence of its objects. And C++ does not have a finally clause. This is not an error.
:-)
And despite C# primitive-like structs, C++ "on the stack" objects will cost nothing at allocation and destruction, and will need no GC to work in an independent thread to do the cleaning.
As for memory fragmentation, memory allocators in 2008 are not the old memory allocators from 1980 that are usually compared with a GC: C++ allocation can't be moved in memory, true, but then, like on a Linux filesystem: Who needs hard disk defragmenting when fragmentation does not happen? Using the right allocator for the right task should be part of the C++ developer toolkit. Now, writing allocators is not easy, and then, most of us have better things to do, and for the most of use, RAII or GC is more than good enough.
Edit 2011-10-04: For examples about efficient allocators: On Windows platforms, since Vista, the Low Fragmentation Heap is enabled by default. For previous versions, the LFH can be activated by calling the WinAPI function HeapSetInformation). On other OSes, alternative allocators are provided (see https://secure.wikimedia.org/wikipedia/en/wiki/Malloc for a list)
Now, the memory model is somewhat becoming more complicated with the rise of multicore and multithreading technology. In this field, I guess .NET has the advantage, and Java, I was told, held the upper ground. It's easy for some "on the bare metal" hacker to praise his "near the machine" code. But now, it is quite more difficult to produce better assembly by hand than letting the compiler to its job. For C++, the compiler became usually better than the hacker since a decade. For C# and Java, this is even easier.
Still, the new standard C++0x will impose a simple memory model to C++ compilers, which will standardize (and thus simplify) effective multiprocessing/parallel/threading code in C++, and make optimizations easier and safer for compilers. But then, we'll see in some couple of years if its promises are held true.
C++/CLI vs. C#/VB.NET
Note: In this section, I am talking about C++/CLI, that is, the C++ hosted by .NET, not the native C++.
Last week, I had a training on .NET optimization, and discovered that the static compiler is very important anyway. As important than JIT.
The very same code compiled in C++/CLI (or its ancestor, Managed C++) could be times faster than the same code produced in C# (or VB.NET, whose compiler produces the same IL than C#).
Because the C++ static compiler was a lot better to produce already optimized code than C#'s.
For example, function inlining in .NET is limited to functions whose bytecode is less or equal than 32 bytes in length. So, some code in C# will produce a 40 bytes accessor, which won't be ever inlined by the JIT. The same code in C++/CLI will produce a 20 bytes accessor, which will be inlined by the JIT.
Another example is temporary variables, that are simply compiled away by the C++ compiler while still being mentioned in the IL produced by the C# compiler. C++ static compilation optimization will result in less code, thus authorizes a more aggressive JIT optimization, again.
The reason for this was speculated to be the fact C++/CLI compiler profited from the vast optimization techniques from C++ native compiler.
Conclusion
I love C++.
But as far as I see it, C# or Java are all in all a better bet. Not because they are faster than C++, but because when you add up their qualities, they end up being more productive, needing less training, and having more complete standard libraries than C++. And as for most of programs, their speed differences (in one way or another) will be negligible...
Edit (2011-06-06)
My experience on C#/.NET
I have now 5 months of almost exclusive professional C# coding (which adds up to my CV already full of C++ and Java, and a touch of C++/CLI).
I played with WinForms (Ahem...) and WCF (cool!), and WPF (Cool!!!! Both through XAML and raw C#. WPF is so easy I believe Swing just cannot compare to it), and C# 4.0.
The conclusion is that while it's easier/faster to produce a code that works in C#/Java than in C++, it's a lot harder to produce a strong, safe and robust code in C# (and even harder in Java) than in C++. Reasons abound, but it can be summarized by:
using is not as easy and powerful because writing a correct Dispose implementations is difficult) readonly and Java final are nowhere as useful as C++'s const (There's no way you can expose readonly complex data (a Tree of Nodes, for example) in C# without tremendous work, while it's a built-in feature of C++. Immutable data is an interesting solution, but not everything can be made immutable, so it's not even enough, by far). So, C# remains an pleasant language as long as you want something that works, but a frustrating language the moment you want something that always and safely works.
Java is even more frustrating, as it has the same problems than C#, and more: Lacking the equivalent of C#'s using keyword, a very skilled colleague of mine spent too much time making sure its resources where correctly freed, whereas the equivalent in C++ would have been easy (using destructors and smart pointers).
So I guess C#/Java's productivity gain is visible for most code... until the day you need the code to be as perfect as possible. That day, you'll know pain. (you won't believe what's asked from our server and GUI apps...).
About Server-side Java and C++
I kept contact with the server teams (I worked 2 years among them, before getting back to the GUI team), at the other side of the building, and I learned something interesting.
Last years, the trend was to have the Java server apps be destined to replace the old C++ server apps, as Java has a lot of frameworks/tools, and is easy to maintain, deploy, etc. etc..
...Until the problem of low-latency reared its ugly head the last months. Then, the Java server apps, no matter the optimization attempted by our skilled Java team, simply and cleanly lost the race against the old, not really optimized C++ server.
Currently, the decision is to keep the Java servers for common use where performance while still important, is not concerned by the low-latency target, and aggressively optimize the already faster C++ server applications for low-latency and ultra-low-latency needs.
Conclusion
Nothing is as simple as expected.
Java, and even more C#, are cool languages, with extensive standard libraries and frameworks, where you can code fast, and have result very soon.
But when you need raw power, powerful and systematic optimizations, strong compiler support, powerful language features and absolute safety, Java and C# make it difficult to win the last missing but critical percents of quality you need to remain above the competition.
It's as if you needed less time and less experienced developers in C#/Java than in C++ to produce average quality code, but in the other hand, the moment you needed excellent to perfect quality code, it was suddenly easier and faster to get the results right in C++.
Of course, this is my own perception, perhaps limited to our specific needs.
But still, it is what happens today, both in the GUI teams and the server-side teams.
Of course, I'll update this post if something new happens.
Edit (2011-06-22)
"We find that in regards to performance, C++ wins out by a large margin. However, it also required the most extensive tuning efforts, many of which were done at a level of sophistication that would not be available to the average programmer.
[...] The Java version was probably the simplest to implement, but the hardest to analyze for performance. Specifically the effects around garbage collection were complicated and very hard to tune."
Sources:
Edit (2011-09-20)
"The going word at Facebook is that 'reasonably written C++ code just runs fast,' which underscores the enormous effort spent at optimizing PHP and Java code. Paradoxically, C++ code is more difficult to write than in other languages, but efficient code is a lot easier [to write in C++ than in other languages]."
– Herb Sutter at //build/, quoting Andrei Alexandrescu
Sources:
Whenever I talk managed vs. unmanaged performance, I like to point to the series Rico (and Raymond) did comparing C++ and C# versions of a Chinese/English dictionary. This google search will let you read for yourself, but I like Rico's summary.
So am I ashamed by my crushing defeat? Hardly. The managed code got a very good result for hardly any effort. To defeat the managed Raymond had to:
Of course he used available lower level libraries to do this, but that's still a lot of work. Can you call what's left an STL program? I don't think so, I think he kept the std::vector class which ultimately was never a problem and he kept the find function. Pretty much everything else is gone.
So, yup, you can definately beat the CLR. Raymond can make his program go even faster I think.
Interestingly, the time to parse the file as reported by both programs internal timers is about the same -- 30ms for each. The difference is in the overhead.
For me the bottom line is that it took 6 revisions for the unmanaged version to beat the managed version that was a simple port of the original unmanaged code. If you need every last bit of performance (and have the time and expertise to get it), you'll have to go unmanaged, but for me, I'll take the order of magnitude advantage I have on the first versions over the 33% I gain if I try 6 times.
链接地址: http://www.djcxy.com/p/85404.html下一篇: C ++性能与Java / C＃