Optimizations for pow() with const non
I have hot spots in my code where I'm doing pow() taking up around 10-20% of my execution time.
My input to pow(x,y) is very specific, so I'm wondering if there's a way to roll two pow() approximations (one for each exponent) with higher performance:
float vectors. If platform specifics can be taken advantage of, right on! A maximum error rate around 0.01% is ideal, though I'm interested in full precision (for float ) algorithms as well.
I'm already using a fast pow() approximation, but it doesn't take these constraints into account. Is it possible to do better?
In the IEEE 754 hacking vein, here is another solution which is faster and less "magical." It achieves an error margin of .08% in about a dozen clock cycles (for the case of p=2.4, on an Intel Merom CPU).
Floating point numbers were originally invented as an approximation to logarithms, so you can use the integer value as an approximation of log2 . This is somewhat-portably achievable by applying the convert-from-integer instruction to a floating-point value, to obtain another floating-point value.
To complete the pow computation, you can multiply by a constant factor and convert the logarithm back with the convert-to-integer instruction. On SSE, the relevant instructions are cvtdq2ps and cvtps2dq .
It's not quite so simple, though. The exponent field in IEEE 754 is signed, with a bias value of 127 representing an exponent of zero. This bias must be removed before you multiply the logarithm, and re-added before you exponentiate. Furthermore, bias adjustment by subtraction won't work on zero. Fortunately, both adjustments can be achieved by multiplying by a constant factor beforehand.
x^p
= exp2( p * log2( x ) )
= exp2( p * ( log2( x ) + 127 - 127 ) - 127 + 127 )
= cvtps2dq( p * ( log2( x ) + 127 - 127 - 127 / p ) )
= cvtps2dq( p * ( log2( x ) + 127 - log2( exp2( 127 - 127 / p ) ) )
= cvtps2dq( p * ( log2( x * exp2( 127 / p - 127 ) ) + 127 ) )
= cvtps2dq( p * ( cvtdq2ps( x * exp2( 127 / p - 127 ) ) ) )
exp2( 127 / p - 127 ) is the constant factor. This function is rather specialized: it won't work with small fractional exponents, because the constant factor grows exponentially with the inverse of the exponent and will overflow. It won't work with negative exponents. Large exponents lead to high error, because the mantissa bits are mingled with the exponent bits by the multiplication.
But, it's just 4 fast instructions long. Pre-multiply, convert from "integer" (to logarithm), power-multiply, convert to "integer" (from logarithm). Conversions are very fast on this implementation of SSE. We can also squeeze an extra constant coefficient into the first multiplication.
template< unsigned expnum, unsigned expden, unsigned coeffnum, unsigned coeffden >
__m128 fastpow( __m128 arg ) {
__m128 ret = arg;
// std::printf( "arg = %,vgn", ret );
// Apply a constant pre-correction factor.
ret = _mm_mul_ps( ret, _mm_set1_ps( exp2( 127. * expden / expnum - 127. )
* pow( 1. * coeffnum / coeffden, 1. * expden / expnum ) ) );
// std::printf( "scaled = %,vgn", ret );
// Reinterpret arg as integer to obtain logarithm.
asm ( "cvtdq2ps %1, %0" : "=x" (ret) : "x" (ret) );
// std::printf( "log = %,vgn", ret );
// Multiply logarithm by power.
ret = _mm_mul_ps( ret, _mm_set1_ps( 1. * expnum / expden ) );
// std::printf( "powered = %,vgn", ret );
// Convert back to "integer" to exponentiate.
asm ( "cvtps2dq %1, %0" : "=x" (ret) : "x" (ret) );
// std::printf( "result = %,vgn", ret );
return ret;
}
A few trials with exponent = 2.4 show this consistently overestimates by about 5%. (The routine is always guaranteed to overestimate.) You could simply multiply by 0.95, but a few more instructions will get us about 4 decimal digits of accuracy, which should be enough for graphics.
The key is to match the overestimate with an underestimate, and take the average.
rsqrtps . (This is quite accurate enough, but does sacrifice the ability to work with zero.) mulps . rsqrtps . mulps . mulps . mulps . This is the overestimate. mulps . This is the underestimate. addps , one mulps . Instruction tally: fourteen, including two conversions with latency = 5 and two reciprocal square root estimates with throughput = 4.
To properly take the average, we want to weight the estimates by their expected errors. The underestimate raises the error to a power of 0.6 vs 0.4, so we expect it to be 1.5x as erroneous. Weighting doesn't add any instructions; it can be done in the pre-factor. Calling the coefficient a: a^0.5 = 1.5 a^-0.75, and a = 1.38316186.
The final error is about .015%, or 2 orders of magnitude better than the initial fastpow result. The runtime is about a dozen cycles for a busy loop with volatile source and destination variables… although it's overlapping the iterations, real-world usage will also see instruction-level parallelism. Considering SIMD, that's a throughput of one scalar result per 3 cycles!
int main() {
__m128 const x0 = _mm_set_ps( 0.01, 1, 5, 1234.567 );
std::printf( "Input: %,vgn", x0 );
// Approx 5% accuracy from one call. Always an overestimate.
__m128 x1 = fastpow< 24, 10, 1, 1 >( x0 );
std::printf( "Direct x^2.4: %,vgn", x1 );
// Lower exponents provide lower initial error, but too low causes overflow.
__m128 xf = fastpow< 8, 10, int( 1.38316186 * 1e9 ), int( 1e9 ) >( x0 );
std::printf( "1.38 x^0.8: %,vgn", xf );
// Imprecise 4-cycle sqrt is still far better than fastpow, good enough.
__m128 xfm4 = _mm_rsqrt_ps( xf );
__m128 xf4 = _mm_mul_ps( xf, xfm4 );
// Precisely calculate x^2 and x^3
__m128 x2 = _mm_mul_ps( x0, x0 );
__m128 x3 = _mm_mul_ps( x2, x0 );
// Overestimate of x^2 * x^0.4
x2 = _mm_mul_ps( x2, xf4 );
// Get x^-0.2 from x^0.4. Combine with x^-0.4 into x^-0.6 and x^2.4.
__m128 xfm2 = _mm_rsqrt_ps( xf4 );
x3 = _mm_mul_ps( x3, xfm4 );
x3 = _mm_mul_ps( x3, xfm2 );
std::printf( "x^2 * x^0.4: %,vgn", x2 );
std::printf( "x^3 / x^0.6: %,vgn", x3 );
x2 = _mm_mul_ps( _mm_add_ps( x2, x3 ), _mm_set1_ps( 1/ 1.960131704207789 ) );
// Final accuracy about 0.015%, 200x better than x^0.8 calculation.
std::printf( "average = %,vgn", x2 );
}
Well… sorry I wasn't able to post this sooner. And extending it to x^1/2.4 is left as an exercise ;v) .
Update with stats
I implemented a little test harness and two x(5⁄12) cases corresponding to the above.
#include <cstdio>
#include <xmmintrin.h>
#include <cmath>
#include <cfloat>
#include <algorithm>
using namespace std;
template< unsigned expnum, unsigned expden, unsigned coeffnum, unsigned coeffden >
__m128 fastpow( __m128 arg ) {
__m128 ret = arg;
// std::printf( "arg = %,vgn", ret );
// Apply a constant pre-correction factor.
ret = _mm_mul_ps( ret, _mm_set1_ps( exp2( 127. * expden / expnum - 127. )
* pow( 1. * coeffnum / coeffden, 1. * expden / expnum ) ) );
// std::printf( "scaled = %,vgn", ret );
// Reinterpret arg as integer to obtain logarithm.
asm ( "cvtdq2ps %1, %0" : "=x" (ret) : "x" (ret) );
// std::printf( "log = %,vgn", ret );
// Multiply logarithm by power.
ret = _mm_mul_ps( ret, _mm_set1_ps( 1. * expnum / expden ) );
// std::printf( "powered = %,vgn", ret );
// Convert back to "integer" to exponentiate.
asm ( "cvtps2dq %1, %0" : "=x" (ret) : "x" (ret) );
// std::printf( "result = %,vgn", ret );
return ret;
}
__m128 pow125_4( __m128 arg ) {
// Lower exponents provide lower initial error, but too low causes overflow.
__m128 xf = fastpow< 4, 5, int( 1.38316186 * 1e9 ), int( 1e9 ) >( arg );
// Imprecise 4-cycle sqrt is still far better than fastpow, good enough.
__m128 xfm4 = _mm_rsqrt_ps( xf );
__m128 xf4 = _mm_mul_ps( xf, xfm4 );
// Precisely calculate x^2 and x^3
__m128 x2 = _mm_mul_ps( arg, arg );
__m128 x3 = _mm_mul_ps( x2, arg );
// Overestimate of x^2 * x^0.4
x2 = _mm_mul_ps( x2, xf4 );
// Get x^-0.2 from x^0.4, and square it for x^-0.4. Combine into x^-0.6.
__m128 xfm2 = _mm_rsqrt_ps( xf4 );
x3 = _mm_mul_ps( x3, xfm4 );
x3 = _mm_mul_ps( x3, xfm2 );
return _mm_mul_ps( _mm_add_ps( x2, x3 ), _mm_set1_ps( 1/ 1.960131704207789 * 0.9999 ) );
}
__m128 pow512_2( __m128 arg ) {
// 5/12 is too small, so compute the sqrt of 10/12 instead.
__m128 x = fastpow< 5, 6, int( 0.992245 * 1e9 ), int( 1e9 ) >( arg );
return _mm_mul_ps( _mm_rsqrt_ps( x ), x );
}
__m128 pow512_4( __m128 arg ) {
// 5/12 is too small, so compute the 4th root of 20/12 instead.
// 20/12 = 5/3 = 1 + 2/3 = 2 - 1/3. 2/3 is a suitable argument for fastpow.
// weighting coefficient: a^-1/2 = 2 a; a = 2^-2/3
__m128 xf = fastpow< 2, 3, int( 0.629960524947437 * 1e9 ), int( 1e9 ) >( arg );
__m128 xover = _mm_mul_ps( arg, xf );
__m128 xfm1 = _mm_rsqrt_ps( xf );
__m128 x2 = _mm_mul_ps( arg, arg );
__m128 xunder = _mm_mul_ps( x2, xfm1 );
// sqrt2 * over + 2 * sqrt2 * under
__m128 xavg = _mm_mul_ps( _mm_set1_ps( 1/( 3 * 0.629960524947437 ) * 0.999852 ),
_mm_add_ps( xover, xunder ) );
xavg = _mm_mul_ps( xavg, _mm_rsqrt_ps( xavg ) );
xavg = _mm_mul_ps( xavg, _mm_rsqrt_ps( xavg ) );
return xavg;
}
__m128 mm_succ_ps( __m128 arg ) {
return (__m128) _mm_add_epi32( (__m128i) arg, _mm_set1_epi32( 4 ) );
}
void test_pow( double p, __m128 (*f)( __m128 ) ) {
__m128 arg;
for ( arg = _mm_set1_ps( FLT_MIN / FLT_EPSILON );
! isfinite( _mm_cvtss_f32( f( arg ) ) );
arg = mm_succ_ps( arg ) ) ;
for ( ; _mm_cvtss_f32( f( arg ) ) == 0;
arg = mm_succ_ps( arg ) ) ;
std::printf( "Domain from %gn", _mm_cvtss_f32( arg ) );
int n;
int const bucket_size = 1 << 25;
do {
float max_error = 0;
double total_error = 0, cum_error = 0;
for ( n = 0; n != bucket_size; ++ n ) {
float result = _mm_cvtss_f32( f( arg ) );
if ( ! isfinite( result ) ) break;
float actual = ::powf( _mm_cvtss_f32( arg ), p );
float error = ( result - actual ) / actual;
cum_error += error;
error = std::abs( error );
max_error = std::max( max_error, error );
total_error += error;
arg = mm_succ_ps( arg );
}
std::printf( "error max = %8gt" "avg = %8gt" "|avg| = %8gt" "to %8gn",
max_error, cum_error / n, total_error / n, _mm_cvtss_f32( arg ) );
} while ( n == bucket_size );
}
int main() {
std::printf( "4 insn x^12/5:n" );
test_pow( 12./5, & fastpow< 12, 5, 1059, 1000 > );
std::printf( "14 insn x^12/5:n" );
test_pow( 12./5, & pow125_4 );
std::printf( "6 insn x^5/12:n" );
test_pow( 5./12, & pow512_2 );
std::printf( "14 insn x^5/12:n" );
test_pow( 5./12, & pow512_4 );
}
Output:
4 insn x^12/5:
Domain from 1.36909e-23
error max = inf avg = inf |avg| = inf to 8.97249e-19
error max = 2267.14 avg = 139.175 |avg| = 139.193 to 5.88021e-14
error max = 0.123606 avg = -0.000102963 |avg| = 0.0371122 to 3.85365e-09
error max = 0.123607 avg = -0.000108978 |avg| = 0.0368548 to 0.000252553
error max = 0.12361 avg = 7.28909e-05 |avg| = 0.037507 to 16.5513
error max = 0.123612 avg = -0.000258619 |avg| = 0.0365618 to 1.08471e+06
error max = 0.123611 avg = 8.70966e-05 |avg| = 0.0374369 to 7.10874e+10
error max = 0.12361 avg = -0.000103047 |avg| = 0.0371122 to 4.65878e+15
error max = 0.123609 avg = nan |avg| = nan to 1.16469e+16
14 insn x^12/5:
Domain from 1.42795e-19
error max = inf avg = nan |avg| = nan to 9.35823e-15
error max = 0.000936462 avg = 2.0202e-05 |avg| = 0.000133764 to 6.13301e-10
error max = 0.000792752 avg = 1.45717e-05 |avg| = 0.000129936 to 4.01933e-05
error max = 0.000791785 avg = 7.0132e-06 |avg| = 0.000129923 to 2.63411
error max = 0.000787589 avg = 1.20745e-05 |avg| = 0.000129347 to 172629
error max = 0.000786553 avg = 1.62351e-05 |avg| = 0.000132397 to 1.13134e+10
error max = 0.000785586 avg = 8.25205e-06 |avg| = 0.00013037 to 6.98147e+12
6 insn x^5/12:
Domain from 9.86076e-32
error max = 0.0284339 avg = 0.000441158 |avg| = 0.00967327 to 6.46235e-27
error max = 0.0284342 avg = -5.79938e-06 |avg| = 0.00897913 to 4.23516e-22
error max = 0.0284341 avg = -0.000140706 |avg| = 0.00897084 to 2.77556e-17
error max = 0.028434 avg = 0.000440504 |avg| = 0.00967325 to 1.81899e-12
error max = 0.0284339 avg = -6.11153e-06 |avg| = 0.00897915 to 1.19209e-07
error max = 0.0284298 avg = -0.000140597 |avg| = 0.00897084 to 0.0078125
error max = 0.0284371 avg = 0.000439748 |avg| = 0.00967319 to 512
error max = 0.028437 avg = -7.74294e-06 |avg| = 0.00897924 to 3.35544e+07
error max = 0.0284369 avg = -0.000142036 |avg| = 0.00897089 to 2.19902e+12
error max = 0.0284368 avg = 0.000439183 |avg| = 0.0096732 to 1.44115e+17
error max = 0.0284367 avg = -7.41244e-06 |avg| = 0.00897923 to 9.44473e+21
error max = 0.0284366 avg = -0.000141706 |avg| = 0.00897088 to 6.1897e+26
error max = 0.485129 avg = -0.0401671 |avg| = 0.048422 to 4.05648e+31
error max = 0.994932 avg = -0.891494 |avg| = 0.891494 to 2.65846e+36
error max = 0.999329 avg = nan |avg| = nan to -0
14 insn x^5/12:
Domain from 2.64698e-23
error max = 0.13556 avg = 0.00125936 |avg| = 0.00354677 to 1.73472e-18
error max = 0.000564988 avg = 2.51458e-06 |avg| = 0.000113709 to 1.13687e-13
error max = 0.000565065 avg = -1.49258e-06 |avg| = 0.000112553 to 7.45058e-09
error max = 0.000565143 avg = 1.5293e-06 |avg| = 0.000112864 to 0.000488281
error max = 0.000565298 avg = 2.76457e-06 |avg| = 0.000113713 to 32
error max = 0.000565453 avg = -1.61276e-06 |avg| = 0.000112561 to 2.09715e+06
error max = 0.000565531 avg = 1.42628e-06 |avg| = 0.000112866 to 1.37439e+11
error max = 0.000565686 avg = 2.71505e-06 |avg| = 0.000113715 to 9.0072e+15
error max = 0.000565763 avg = -1.56586e-06 |avg| = 0.000112415 to 1.84467e+19
I suspect accuracy of the more accurate 5/12 is being limited by the rsqrt operation.
Another answer because this is very different from my previous answer, and this is blazing fast. Relative error is 3e-8. Want more accuracy? Add a couple more Chebychev terms. It's best to keep the order odd as this makes for a small discontinuity between 2^n-epsilon and 2^n+epsilon.
#include <stdlib.h>
#include <math.h>
// Returns x^(5/12) for x in [1,2), to within 3e-8 (relative error).
// Want more precision? Add more Chebychev polynomial coefs.
double pow512norm (
double x)
{
static const int N = 8;
// Chebychev polynomial terms.
// Non-zero terms calculated via
// integrate (2/pi)*ChebyshevT[n,u]/sqrt(1-u^2)*((u+3)/2)^(5/12)
// from -1 to 1
// Zeroth term is similar except it uses 1/pi rather than 2/pi.
static const double Cn[N] = {
1.1758200232996901923,
0.16665763094889061230,
-0.0083154894939042125035,
0.00075187976780420279038,
// Wolfram alpha doesn't want to compute the remaining terms
// to more precision (it times out).
-0.0000832402,
0.0000102292,
-1.3401e-6,
1.83334e-7};
double Tn[N];
double u = 2.0*x - 3.0;
Tn[0] = 1.0;
Tn[1] = u;
for (int ii = 2; ii < N; ++ii) {
Tn[ii] = 2*u*Tn[ii-1] - Tn[ii-2];
}
double y = 0.0;
for (int ii = N-1; ii >= 0; --ii) {
y += Cn[ii]*Tn[ii];
}
return y;
}
// Returns x^(5/12) to within 3e-8 (relative error).
double pow512 (
double x)
{
static const double pow2_512[12] = {
1.0,
pow(2.0, 5.0/12.0),
pow(4.0, 5.0/12.0),
pow(8.0, 5.0/12.0),
pow(16.0, 5.0/12.0),
pow(32.0, 5.0/12.0),
pow(64.0, 5.0/12.0),
pow(128.0, 5.0/12.0),
pow(256.0, 5.0/12.0),
pow(512.0, 5.0/12.0),
pow(1024.0, 5.0/12.0),
pow(2048.0, 5.0/12.0)
};
double s;
int iexp;
s = frexp (x, &iexp);
s *= 2.0;
iexp -= 1;
div_t qr = div (iexp, 12);
if (qr.rem < 0) {
qr.quot -= 1;
qr.rem += 12;
}
return ldexp (pow512norm(s)*pow2_512[qr.rem], 5*qr.quot);
}
Addendum: What's going on here?
Per request, the following explains how the above code works.
Overview
The above code defines two functions, double pow512norm (double x) and double pow512 (double x) . The latter is the entry point to the suite; this is the function that user code should call to calculate x^(5/12). The function pow512norm(x) uses Chebyshev polynomials to approximate x^(5/12), but only for x in the range [1,2]. (Use pow512norm(x) for values of x outside that range and the result will be garbage.)
The function pow512(x) splits the incoming x into a pair (double s, int n) such that x = s * 2^n and such that 1≤ s <2. A further partitioning of n into (int q, unsigned int r) such that n = 12*q + r and r is less than 12 lets me split the problem of finding x^(5/12) into parts:
x^(5/12)=(s^(5/12))*((2^n)^(5/12)) via (uv)^a=(u^a)(v^a) for positive u,v and real a. s^(5/12) is calculated via pow512norm(s) . (2^n)^(5/12)=(2^(12*q+r))^(5/12) via substitution. 2^(12*q+r)=(2^(12*q))*(2^r) via u^(a+b)=(u^a)*(u^b) for positive u, real a,b. (2^(12*q+r))^(5/12)=(2^(5*q))*((2^r)^(5/12)) via some more manipulations. (2^r)^(5/12) is calculated by the lookup table pow2_512 . pow512norm(s)*pow2_512[qr.rem] and we're almost there. Here qr.rem is the r value calculated in step 3 above. All that is needed is to multiply this by 2^(5*q) to yield the desired result. ldexp does. Function Approximation
The goal here is to come up with an easily computable approximation of f(x)=x^(5/12) that is 'good enough' for the problem at hand. Our approximation should be close to f(x) in some sense. Rhetorical question: What does 'close to' mean? Two competing interpretations are minimizing the mean square error versus minimizing the maximum absolute error.
I'll use a stock market analogy to describe the difference between these. Suppose you want to save for your eventual retirement. If you are in your twenties, the best thing to do is to invest in stocks or stock market funds. This is because over a long enough span of time, the stock market on average beats any other investment scheme. However, we've all seen times when putting money into stocks is a very bad thing to do. If you are in your fifties or sixties (or forties if you want to retire young) you need to invest a bit more conservatively. Those downswings can wreak have on your retirement portfolio.
Back to function approximation: As the consumer of some approximation, you are typically worried about the worst-case error rather than the performance "on average". Use some approximation constructed to give the best performance "on average" (eg least squares) and Murphy's law dictates that your program will spend a whole lot of time using the approximation exactly where the performance is far worse than average. What you want is a minimax approximation, something that minimizes the maximum absolute error over some domain. A good math library will take a minimax approach rather than a least squares approach because this lets the authors of the math library give some guaranteed performance of their library.
Math libraries typically use a polynomial or a rational polynomial to approximate some function f(x) over some domain a≤x≤b. Suppose the function f(x) is analytic over this domain and you want to approximate the function by some polynomial p(x) of degree N. For a given degree N there exists some magical, unique polynomial p(x) such that p(x)-f(x) has N+2 extrema over [a,b] and such that the absolute values of these N+2 extrema are all equal to one another. Finding this magical polynomial p(x) is the holy grail of function approximators.
I did not find that holy grail for you. I instead used a Chebyshev approximation. The Chebyshev polynomials of the first kind are an orthogonal (but not orthonormal) set of polynomials with some very nice features when it comes to function approximation. The Chebyshev approximation oftentimes is very close to that magical polynomial p(x). (In fact, the Remez exchange algorithm that does find that holy grail polynomial typically starts with a Chebyshev approximation.)
pow512norm(x)
This function uses Chebyshev approximation to find some polynomial p*(x) that approximates x^(5/12). Here I'm using p*(x) to distinguish this Chebyshev approximation from the magical polynomial p(x) described above. The Chebyshev approximation p*(x) is easy to find; finding p(x) is a bear. The Chebyshev approximation p*(x) is sum_i Cn[i]*Tn(i,x), where the Cn[i] are the Chebyshev coefficients and Tn(i,x) are the Chebyshev polynomials evaluated at x.
I used Wolfram alpha to find the Chebyshev coefficients Cn for me. For example, this calculates Cn[1] . The first box after the input box has the desired answer, 0.166658 in this case. That's not as many digits as I would like. Click on 'more digits' and voila, you get a whole lot more digits. Wolfram alpha is free; there is a limit on how much computation it will do. It hits that limit on higher order terms. (If you buy or have access to mathematica you will be able to calculate those high-order coefficients to a high degree of precision.)
The Chebyshev polynomials Tn(x) are calculated in the array Tn . Beyond giving something very close to magical polynomial p(x), another reason for using Chebyshev approximation is that the values of those Chebyshev polynomials are easily calculated: Start with Tn[0]=1 and Tn[1]=x , and then iteratively calculate Tn[i]=2*x*Tn[i-1] - Tn[i-2] . (I used 'ii' as the index variable rather than 'i' in my code. I never use 'i' as a variable name. How many words in the English language have an 'i' in the word? How many have two consecutive 'i's?)
pow512(x)
pow512 is the function that user code should be calling. I already described the basics of this function above. A few more details: The math library function frexp(x) returns the significand s and exponent iexp for the input x . (Minor issue: I want s between 1 and 2 for use with pow512norm but frexp returns a value between 0.5 and 1.) The math library function div returns the quotient and remainder for integer division in one swell foop. Finally, I use the math library function ldexp to put the three parts together to form the final answer.
Ian Stephenson wrote this code which he claims outperforms pow() . He describes the idea as follows:
Pow is basically implemented using log's: pow(a,b)=x(logx(a)*b) . so we need a fast log and fast exponent - it doesn't matter what x is so we use 2. The trick is that a floating point number is already in a log style format:
a=M*2E
Taking the log of both sides gives:
log2(a)=log2(M)+E
or more simply:
log2(a)~=E
In other words if we take the floating point representation of a number, and extract the Exponent we've got something that's a good starting point as its log. It turns out that when we do this by massaging the bit patterns, the Mantissa ends up giving a good approximation to the error, and it works pretty well.
This should be good enough for simple lighting calculations, but if you need something better, you can then extract the Mantissa, and use that to calculate a quadratic correction factor which is pretty accurate.
链接地址: http://www.djcxy.com/p/85722.html上一篇: 我可以在编译时计算pow（10，x）
下一篇: 使用const non优化pow（）