Mimic or emulate a passive RFID tag and program it

2018-07-01 18:50:22

I have a device that contains an RFID reader/writer supporting ISO/IEC 14443 (13.56 MHz frequency). It works with MiFARE, NTag215 tags. I want to automate the testing without having to physically present the tags to the device.

I'm wondering if there's Off The Shelf (OTS) hardware that can mimic a passive RFID tag and can be programmed via a software API? Ideally I would like automate a test in two steps (a) program a tag and (b) present the tag to the device.

There's plenty of readers/writers with USB and Bluetooth interfaces and software APIs but these are only for programming or reading tags.

A related question was if it's possible to have an android application mimic a physical card. My question is somewhat similar but more generic and not just for Android phones. My preference is to buy something OTS rather than build something, eg with an Arduino type device.

the Emutag should be able to serve your needs. NTAG 215 is a higher memory version of NTAG 213.

链接地址: http://www.djcxy.com/p/88620.html

上一篇: 如何在基于pN512的Explore中读取NDEF消息

下一篇: 模仿或仿真无源RFID标签并对其进行编程