Target: I would like to test all Nginx proxy timeout parameters in very simple scenario. My first approach was to create really simple HTTP server and put some timeouts: Between listen and accept to test proxy_connect_timeout Between accept and read to test proxy_send_timeout Between read and send to test proxy_read_timeout Test: 1) Server code (python): import socket import os impo
目标： 我想在非常简单的情况下测试所有的Nginx代理超时参数。 我的第一个方法是创建一个非常简单的HTTP服务器并放置一些超时： 在listen和accept之间测试proxy_connect_timeout 在accept和read之间测试proxy_send_timeout 在读取和发送之间测试proxy_read_timeout 测试： 1）服务器代码（python）： import socket import os import time import threading def http_resp(conn): conn.send("HTTP/1.1 200 OKr
my goal is to run a script on a Synology DiskStation using python3. I've installed Python 3 via the software center and tried to install Python pandas using pip. However, I'm having trouble with that. Whenever I run as root pip install pandas i get File "/usr/local/python3/lib/python3.4/site.py", line 176 file=sys.stderr) ^ SyntaxError: invalid syntax Previously I had P
我的目标是使用python3在Synology DiskStation上运行脚本。 我已经通过软件中心安装了Python 3，并尝试使用pip安装Python熊猫。 但是，我遇到了麻烦。 每当我以root身份运行时 pip install pandas 我明白了 File "/usr/local/python3/lib/python3.4/site.py", line 176 file=sys.stderr) ^ SyntaxError: invalid syntax 以前我运行Python 2.7但是卸载了它，我感觉我的问题可能与我安装了两个版本的Python有关
This question already has an answer here: How to install pip with Python 3? 16 answers This stackoverflow post explains how to install pip for python3 in CentosOS7. Installing pip on CentOS 7 for Python 3.x Assuming you installed Python 3.4 from EPEL, you can install Python 3's setup tools and use it to install pip. # First command requires you to have enabled EPEL for CentOS7 sudo
这个问题在这里已经有了答案： 如何用Python 3安装pip？ 16个答案 这个stackoverflow文章解释了如何在CentosOS7中为python3安装pip。 在CentOS 7上为Python 3.x安装pip 假设您从EPEL安装了Python 3.4，则可以安装Python 3的安装工具并使用它来安装pip。 # First command requires you to have enabled EPEL for CentOS7 sudo yum install python34-setuptools sudo easy_install pip 您可以添加IUS repo，然后通过yum
sudo -H pip install netmiko Collecting netmiko ---- Installing collected packages: setuptools, idna, ipaddress, enum34, cryptography, paramiko, scp, pyyaml, netmiko Found existing installation: setuptools 1.1.6 Uninstalling setuptools-1.1.6: Exception: Traceback (most recent call last): File "/Library/Python/2.7/site-packages/pip-8.1.2-py2.7.egg/pip/basecommand.py", line 215, in mai
sudo -H pip安装netmiko收集netmiko ---- 安装收集的软件包：setuptools，idna，ipaddress，enum34，cryptography，paramiko，scp，pyyaml，netmiko发现现有的安装：setuptools 1.1.6卸载setuptools-1.1.6：异常：追踪（最近一次调用最后）：文件“/ Library /Python/2.7/site-packages/pip-8.1.2-py2.7.egg/pip/basecommand.py“，第215行，在main status = self.run（options，args）文件”/ Library / Python / 2.7 / site-p
I tried sudo pip install cryptography And the error message is Collecting cryptography Using cached cryptography-1.3.2-cp27-none-macosx_10_6_intel.whl Requirement already satisfied (use --upgrade to upgrade): cffi>=1.4.1 in /Library/Python/2.7/site-packages (from cryptography) Requirement already satisfied (use --upgrade to upgrade): pyasn1>=0.1.8 in /Library/Python/2.7/site-packages
我试过了 sudo pip安装密码 并且错误信息是 收集加密使用缓存加密-1.3.2-cp27-none-macosx_10_6_intel.whl需求已经满足（使用 - 升级升级）：cffi> = 1.4.1 /Library/Python/2.7/site-packages（来自加密技术）需求已满足（使用 - 升级升级）：pyasn1> = 0.1.8 in /Library/Python/2.7/site-packages（来自加密）收集setuptools> = 11.3（来自加密）使用缓存的setuptools-21.0.0- py2.py3-none-any.whl需求已经满
I have a macbook pro that came pre-installed with python 2.7. I later installed python3 and ipython notebook. I installed pip too to install packages, and am able to install packages and run program from python 3. However, for another project I need to run code in python 2.7, and I am not sure how to install it in python 2.7 folder. I tried using pip for installing packages to 2.7, but it kep
我有一个预装了python 2.7的macbook pro。 我后来安装了python3和ipython笔记本。 我也安装了pip以安装软件包，并且能够安装软件包并从python 3运行程序。但是，对于另一个项目，我需要在python 2.7中运行代码，并且我不确定如何将它安装到python 2.7文件夹中。 我尝试使用pip将软件包安装到2.7，但它一直给出错误，表示软件包已存在。 当我使用--version检查python的版本时，我看到安装了2个python。 但是，当我检查点和p
Question : why is python3 unable to find the engine module when importing pyttsx? Details : I'm doing this on a raspberry pi with Raspbian Wheezy Under python 2.7, the following works: >>> import pyttsx Under python3, the following happens: >>> import pyttsx Traceback (etc...) File "<stdin>", line 1, in <module> File "/usr/local/lib/python3.2/dist-pack
问题 ：为什么python3在导入pyttsx时无法找到引擎模块？ 详情 ： 我正在Raspbian Wheezy的覆盆子pi上做这个 在python 2.7下，以下工作： >>> import pyttsx 在python3下，会发生以下情况： >>> import pyttsx Traceback (etc...) File "<stdin>", line 1, in <module> File "/usr/local/lib/python3.2/dist-packages/pyttsx-1.1-py3.2.egg/pyttsx/__init__.py", line 18, in <module
Is OpenCV still not available for Python 3.3 and do I really have to downgrade to Python 2.7 to use it? I didn't find much about it on the internet, only some posts from 2012 that OpenCV wasn't yet ported to be used in Python 3.x. But now it's 2014 and after trying to install the latest OpenCV 2.4.x and copying the cv2.pyd file to C:Program Files (x86)Python333Libsite-packages this
OpenCV仍然不适用于Python 3.3，我真的必须降级到Python 2.7才能使用它吗？ 我在互联网上没有发现太多内容，只有2012年的一些帖子说OpenCV还没有移植到Python 3.x中。 但现在是2014年，在尝试安装最新的OpenCV 2.4.x并将cv2.pyd文件复制到C： Program Files（x86） Python333 Lib site-packages之后，仍会在Python IDLE中产生错误： >>> import cv2 Traceback (most recent call last): File "<pyshell#0>"
I have installed pycurl via pip on OS X 10.9. When I run python file with import pycurl python tells me next error: ImportError: dlopen(/usr/local/Cellar/python3/3.3.2/Frameworks/Python.framework/Versions/3.3/lib/python3.3/site-packages/pycurl.so, 2): Symbol not found: _PyFile_AsFile Referenced from: /usr/local/Cellar/python3/3.3.2/Frameworks/Python.framework/Versions/3.3/lib/python3.3/site-pa
我已经在OS X 10.9上通过pip安装了pycurl 。 当我运行python文件import pycurl python告诉我下一个错误： ImportError：dlopen（/usr/local/Cellar/python3/3.3.2/Frameworks/Python.framework/Versions/3.3/lib/python3.3/site-packages/pycurl.so，2）：未找到符号：_PyFile_AsFile已引用来自：/usr/local/Cellar/python3/3.3.2/Frameworks/Python.framework/Versions/3.3/lib/python3.3/site-packages/pycurl.so预计：/ us
I am trying to set a cookie in my browser using a Python Flask backend however, when we call the set cookie function I am unable to observe the cookie being saved by the browser. The following is my current understanding about how this is supposed to work: Cookies are just key value pairs that may have an expiration which makes them persistent, otherwise they expire when the browser is closed
我试图在我的浏览器中使用Python Flask后端设置cookie，但是当我们调用设置cookie函数时，我无法观察到浏览器保存的cookie。 以下是我目前对这应该如何工作的理解： Cookie只是关键值对，可能会过期，从而导致它们持续存在，否则它们会在浏览器关闭时过期 要设置一个cookie，所有必要的是在响应中使用set-cookie标头。 我调用瓶响应对象的set_cookie方法来做到这一点。 浏览器应该自动保存cookie并遵循过期规则（在浏览